World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137081620 |
HAN: | 23434 |
Category: | E-Ink / E-Paper |
Interface/Connector: | SPI |
Resolution: | 800x480 |
Form/Type: | E-Paper |
Storage Tiers: | Tier3 |
Touchscreen: | Non-Touch |
Platform: | Arduino*, Raspberry Pi*, Jetson Nano* |
Display Size (inch): | 7.3 |
Shipping weight: | 0,07 kg |
Item weight: | 0,06 kg |
Dimensions ( Length × Width × Height ): | 17,02 × 11,10 × 2,00 cm |
7.3inch ACeP 7-Color E-Paper E-Ink Display Module, 800x480 Pixels, SPI Communicationm, low power, wide viewing angle, paper-like effect without electricity. Ideal for price tags, shelf labels, industrial instruments...
- Size: 7.3?
- Resolution: 800x480
- Viewing Angle: >170°
- Display Color: 7-color
- Grey Scale: 2
- Communication: SPI
- Display Panel: E-paper
- Experience: Paper-like
- Environment: Ambient Light Required
- Display Type: Passively Reflective
Features
- Advanced Color ePaper (ACeP) technology, supports 7-Color display
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Specifications
- operating voltage: 3.3V/5V
- display color: 7-Color
- interface: 3-wire SPI, 4-wire SPI
- grey scale: 2
- outline dimensions: 170.2 x 111.2mm
- full refresh time: 35s
- display size: 160 x 96mm
- refresh power: <49.4mW (typ.)
- DOT PITCH: 0.2 x 0.2 mm
- standby current: <0.01uA (almost none)
- RESOLUTION: 800x480 pixels
- viewing angle: >170°
Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Pi Series Boards, Jetson Nano
Onboard SPI Control Interface
For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
- VCC: Power (3.3V / 5V input)
- GND: Ground
- DIN: SPI MOSI pin
- SCLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Busy status output pin
WIKI: www.waveshare.com/wiki/7.3inch_e-Paper_HAT_(F)
Lieferumfang
- 7.3inch e-Paper (F) x1
- Driver Board and FFC cable x1
- PH2.0 20cm 8Pin x1
- RPi screws pack (2pcs) x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de