SparkFun Wireless GPS Logger Shield

Artikelnummer: SF13750

Kategorie: Entwicklungsboard


59,44 €

inkl. 19% USt.,

3 Packung auf Lager

Lieferfrist: ca. 1 - 3 Tage

Packung


Beschreibung

Overview

The SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you?ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a GP3906-TLP GPS Module ? a 66-channel GPS receiver featuring a MediaTek MT3339 architecture and up to a 10Hz update rate. The GPS module will stream constant position updates over a simple TTL-level serial port, which you can then log to a µSD card and/or use for other purposes.

Everything on the shield is highly configurable: A switch allows you to select the GPS module?s UART interface between either hardware or software ports, the µSD card operates over a hardware SPI port, which should be compatible with most Arduino layouts, and extra prototyping space should allow you to add those last, few components you need to complete your project. The GPS Logger Shield?s main voltage supply is taken from the Arduino 5V header pin. This voltage is regulated down to 3.3V, which is supplied to both the GPS module and the µSD card. These two components should consume, about 30mA on average, but they may very occasionally spike to around 100mA. We also highly recommend a 12mm Coin Cell Battery, which fits into the GPS Shield?s battery holder.

Technical Details of GPS Logger Shield

  • On-Board GP3906-TLP GPS Module
  • 12mm Coin cell battery socket
  • µSD memory card socket
  • Standard Arduino sized shield
  • Prototyping area
  • GPS Module Pins Broken Out
  • Arduino reset button
  • UART switch controls serial communications

Technical Details of GP3906

  • Based on MediaTek Single Chip Architecture (MT3339).
  • ARM7 based application processor
  • High sensitivity: -165dBm tracking
  • L1 frequency, C/A code
  • Channels: 66 acquisition, 22 simultaneous tracking
  • Low power consumption: 26mA @ acquisition, 20mA @ tracking
  • Cold/Warm/Hot start time: <35/<33/<1 seconds
  • Maximum update rate up to 10Hz
  • GPS data interface: TTL level serial port
  • Support NMEA 0183 standard V3.01 and backward compliance
  • Support SBAS ? WAAS, EGNOS, GAGAN and MSAS
  • Dimension:16mm x 16mm x 6.7mm
  • RoHS compliant
  • Advanced software features
    • AlwaysLocateTM advanced location awareness technology
    • EPOTM orbit prediction
    • Supports logger function (LOCUS)

You can also cheek our "Dokumente" for more information

Package List:

1x SparkFun GPS Logger Shield

Dokumente

Schematic

Eagle Files

Hookup Guide

Datasheet (GP3906)

GitHub

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

ähnliche Produkte:
Retired! SparkFun GPS Receiver Breakout - LS20126 Retired! SparkFun GPS Receiver Breakout - LS20126
4 auf Lager
Seeed Studio Grove - GPS Wireless Modul SIM28 Seeed Studio Grove - GPS Wireless Modul SIM28
2 Packung auf Lager
Kunden kauften dazu folgende Produkte
HIMALAYA basic MEGA 2560 R3 ATMEGA Board Arduino Mega... HIMALAYA basic MEGA 2560 R3 ATMEGA Board Arduino Mega...
228 Packung auf Lager
HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB... HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB...
538 Stück auf Lager
16GB Micro SD Card Class 10 Speicherkarte mit Adapter 16GB Micro SD Card Class 10 Speicherkarte mit Adapter
463 Packung auf Lager
8GB Micro SD Card HC Class 10 Speicherkarte mit Adapter 8GB Micro SD Card HC Class 10 Speicherkarte mit Adapter
55 Packung auf Lager