SparkFun Thermocouple Breakout - MAX31855K

Item number: SF13266

MPN: SEN-13266

Category: Environmental Sensors

15,94 €

including 19% VAT.,

Short supply

Shipping time: 8 - 10 workdays


The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). Once this is achieved, a voltage potential is formed and current flows. The SparkFun Thermocouple Breakout takes a standard Type-K thermocouple in one end, digitizes the temperature measured and sends that data out the other end via a SPI interface, thereby interpreting the data and translating it for you to read!

With the SparkFun Thermocouple Breakout, the thermocouple's hot junction can be read from -200±0C to +700±0C with an accuracy of ±12±0C while the cold junction, inside the MAX31855K, can only range from -20±0C to +85±0C while maintaining ±12±0C accuracy. The MAX31855K constantly measures the temperature of the cold junction using an internal temperature-sensing diode. The MAX31855K requires a power source from +3.0V to +3.6V (+3.0V nominal) and only draws 1.5mA maximum.

The Thermocouple Breakout is designed to accept a standard thermocouple connector, for convenience and compatibility with probes you may already own. These connectors aren't necessary, and you could solder a thermocouple directly into the through holes labeled \u2018+' and \u2018-'. If you decide to solder the thermocouple directly to the breakout board, it is recommended that the thermocouple be mounted for strain relief to avoid breaking the thin wires. Notches for a zip-tie or wire wrapping have been provided in the PCB opposite the header for this purpose.


  • 14-bit Resolution
  • SPI-Compatible, Serial Interface
  • -200±0C to +700±0C Temperature Reading with ±12±0C Accuracy
  • 3.0V to 3.6V (+3.0V nominal) Required
  • Accepts Type-K Thermocouple


Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item