SparkFun Qwiic Scale - NAU7802

Artikelnummer: SF15242

Kategorie: QWIIC


17,79 €

inkl. 19% USt.,

2 Packung auf Lager

Lieferfrist: 0 Werktage

Packung


Beschreibung

Overview

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

By connecting a load cell to the Qwiic Scale you will be able to translate sensor data into something your microcontroller can read. The NAU7802 is an ADC with built in gain and I2C output to amplify and convert the readings from a standard load cell. A load cell is basically a device that translates pressure or force into electrical signals. In most cases this signal is very small and needs to be amplified. There are many popular chips that read the change and amplify it, but the NAU7802 goes one step further and converts everything to a true I2C output (attached to a Qwiic connector).

The board provides a four spring terminal to connect your load cell with no soldering required. In addition to the I2C pins, the board also breaks out an interrupt pin and AVDD to the edge of the board. The differential input signals (plus a second set of input signals) are broken out to the middle of the board, as well.

Specification

  • Operating Voltage: 3.3V (NAU7802: 2.7V-5.5V)
  • 24-bit Dual-Channel Analog to Digital Converter
  • Programmable Gain Amplifier
  • On-chip temperature sensor
  • Simultaneous 50Hz and 60Hz rejection
  • Programmable PGA gains from 1 to 128
  • Programmable aDC data output rates
  • External differential reference voltage range from 0.1V to 5V
  • Low Power Consumption and Programmable Power Management Options
    • <1uA standby current
  • 2x Qwiic Connectors

Package List

1x SparkFun Qwiic Scale - NAU7802

Dokumente

Schematic

EagleFiles

Hookup Guide

Datasheet (NAU7802)

Getting Started with Load Cells

Github

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

Diese Modul passt zu folgende Produkten:
SparkFun 4pin 1mm pitch JST Qwiic Cable - 100mm SparkFun 4pin 1mm pitch JST Qwiic Cable - 100mm
6 Packung auf Lager
SparkFun 4pin 1mm pitch JST Qwiic Cable - 500mm SparkFun 4pin 1mm pitch JST Qwiic Cable - 500mm
3 Packung auf Lager
SparkFun 4pin 1mm pitch JST Qwiic Cable - 50mm SparkFun 4pin 1mm pitch JST Qwiic Cable - 50mm
3 bestellt, am 29.06.2019 erwartet
SparkFun Qwiic Cable Kit SparkFun Qwiic Cable Kit
2 Packung auf Lager
ähnliche Produkte:
SparkFun Load Cell Amplifier - HX711 for Weight Measurements SparkFun Load Cell Amplifier - HX711 for Weight Measurements
5 bestellt, am 29.06.2019 erwartet
SparkFun Load Sensor Combinator (Ver. 1.1) SparkFun Load Sensor Combinator (Ver. 1.1)
2 Packung auf Lager
SparkFun OpenScale open source solution for measuring... SparkFun OpenScale open source solution for measuring...
2 Packung auf Lager