SparkFun Gator:bit 2,7V-9V Input Voltage SPI I2C Development Prototyping Platform

Item number: SF14484

GTIN: 4060137048593

SKU: DEV-14484

Country of origin: US

UPC: 802556163

TARIC-Code: 8542.39.0001

Category: Micro:bit

22,36 €

including 19% VAT.,

Old price: 27,69 €
Available now!

Shipping time: 1 - 3 workdays



The SparkFun gator:bit is an all-in-one "carrier" board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out of it! Whether it is data visualization using the five on-board addressable LEDs, capacitive touch sensing on pins 0, 1, & 2, or creating musical works of art using the built-in speaker we've got it covered with the with the SparkFun gator:bit!

The major benefit of gator:bit that we have provided is safe access to as many GPIO as possible from the micro:bit. Not only are pins 0, 1, 2, 8, 16, 5 (Button A), and 11 (Button B) broken out, but they are also protected against over voltage and over current/short circuit. Pins 0, 1, and 2 are ADC pins and are also the capacitive touch pins. Pins 8, 16, 5, and 11 are digital pins capable of read and write. Additionally, pins 13 (SPI), 14(SPI), 15(SPI), 19 (I2C), and 20 (I2C) can be used to read and write whatever digital signals you could want. We go into much more detail about each pin and other attributes (like supplying voltage out, light, and sound) in the SparkFun gator:bit Guide found below. Make sure to check that out!

Each SparkFun gator:bit can be powered from 2.7V - 9V giving you quite a range of powering options. There are two ways of powering your gator:bit, either from the JST battery terminal or the alligator clip pads labeled "VIN". Any voltage input between 2.7V and 9V will be regulated to 3.3V to power the micro:bit, the speaker, and for use by any of the alligator clip pins.

Even without any external hardware the gator:bit is still an exploratory development board for micro:bit allowing the easiest access to it for educators, beginners, and pro-makers alike.

The micro:bit is a pocket-sized computer that lets you get creative with digital technology. Between the micro:bit and our shield-like bit boards you can do almost anything while coding, customizing and controlling your micro:bit from almost anywhere! You can use your micro:bit for all sorts of unique creations, from robots to musical instruments and more. At half the size of a credit card, this versatile board has vast potential!


  • micro:bit card edge connector
  • Input voltage: 2.7V - 9V
  • 5 built in addressable LEDs
  • Built in buzzer
  • 5V output
  • 3.3V output
  • 7 protected input/output pins
  • 3 pins for SPI communication
  • 2 pins for I2C
Schauen Sie sich bitte den Reiter 'Dokumente' weitere Informationen an.


  • 1x SparkFun gator:bit



Eagle Files

Getting Started with the micro:bit

micro:bit Programmer



Hookup Guide

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

10x Balanced line Patch Cable Krokodilklemme in 5 Colors 10x Balanced line Patch Cable Krokodilklemme in 5 Colors
Available now!
4x Conductor Shielded Balanced line Patch Cable(2 rot,2... 4x Conductor Shielded Balanced line Patch Cable(2 rot,2...
Available now!
Sparkfun micro:bit Battery Holder - 2xAA (JST-PH) Sparkfun micro:bit Battery Holder - 2xAA (JST-PH)
Available now!