SparkFun Capacitive Touch Sensor Breakout - MPR121

Artikelnummer: SF9695

Hersteller Artikel Nr.: SEN-09695

Kategorie: Berührungs-/ Drucksensor


8,21 €

inkl. 19% USt.,

Lange Lieferzeit beachten!

Lieferzeit: 10 bis 11 Tage

Stk


Beschreibung

Retired Product

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for datasheets and the simply curious.

This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can't operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).

Documents:


Artikelgewicht: 0,00 Kg

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

Kunden kauften dazu folgende Produkte
Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance... Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance...
sofort verfügbar
Jumper Wire 10x1P female to female 20cm
sofort verfügbar
Pololu Wheel for FEETECH FS90R Micro Servo, 60×8mm Pair -... Pololu Wheel for FEETECH FS90R Micro Servo, 60×8mm Pair -...
sofort verfügbar
SparkFun Touch Shield SparkFun Touch Shield

SparkFun Touch Shield

14,78 € *
Lange Lieferzeit beachten!
Prototype Shield V5 + Mini Breadboard für Arduino Uno R3 Prototype Shield V5 + Mini Breadboard für Arduino Uno R3
sofort verfügbar
SparkFun Capacitive Touch Breakout - AT42QT1010 SparkFun Capacitive Touch Breakout - AT42QT1010
sofort verfügbar
IIC I2C TWI 2004 Serial Green LCD 20X4 Zeichen Module 5V IIC I2C TWI 2004 Serial Green LCD 20X4 Zeichen Module 5V
sofort verfügbar
65 Pcs Breadboard Steckbrücken Drahtbrücken flexibel... 65 Pcs Breadboard Steckbrücken Drahtbrücken flexibel...
sofort verfügbar