reComputer J202 is a high-performance, interface-rich NVIDIA Jetson Nano / Xavier NX / TX2 NX compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB3.1 Gen 2, M.2 key E wifi / BT, M.2 key M, CSI camera, CAN, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. It has the same functional design and size as the carrier board of NVIDIA® Jetson Xavier™ NX DEVELOPER KIT.
- Perfectly suited: Design for Jetson Nano/Xavier NX/TX2 NX (260-pin SODIMM).
-
Developer Kit carrier board alternative: 1:1 matches the size and nearly the same functional design as the carrier board of Nvidia’s official Jetson Xavier NX Developer Kit.
-
Rich peripherals: Higher performance stability consists of USB 3.2 gen 2 ports(4x), M.2 key E for WIFI, M.2 Key M for SSD, RTC, CAN, Raspberry Pi GPIO 40-pin, and so on.
-
High versatility: Suitable for complicated AI graphical applications.
- Comprehensive certificates: FCC, CE, RoHS (Certification received in early Sept)
Note
- When using with Jetson Nano module, the M.2 E KEY and CAN cannot work.
- We recommend using 9-12V power adapter, however J202 could support 15V MAX.
- If you want to get started with a Jetson module (flash to eMMC or SSD) under Recovery mode, please check our wiki.
Functionality
With the NVIDIA Jetson module assembled, it could support NVIDIA JetPack, which includes a board support package (BSP), Linux OS, NVIDIA CUDA®, cuDNN, and TensorRT™ software libraries for deep learning, computer vision, GPU computing, multimedia processing, and much more.
With its multiple camera connectors, it is suitable for running multiple neural networks in parallel for applications like image classification, object detection, segmentation, and speech processing.
Specifications
- Feature: reComputer J202
- Module Compatibility: Jetson™ Nano/Xavier NX/TX2 NX
- PCB Size / Overall Size: 100mm*80mm
- Display: 1* HDMI+1* DP
- CSI Camera: 2* CSI
- Ethernet: 1* Gigabit Ethernet (10/100/1000M)
- USB
- 4* USB 3.1 Type-A (10Gbps for NX, 5Gbps for Nano);
- 1* USB Type-C (Device mode)
- M.2 Key M: 1* M.2 Key M
- Micro SD card: \
- M.2 Key E: 1* M.2 Key E
- FAN: 1* Fan Connector
- CAN: 1* CAN
- Multifunctional port
- RTC
- RTC socket(reserved)
- Power supply
- 12V/5A (Barrel Jack 5.5/2.1mm)
- Power Cord provided only
Part List
- 1 x reComputer J202 Carrier Board
- We will not include a 3V RTC battery.
- We will not include the Power Adapter 12V/5A (Barrel Jack 5.5/2.1mm)
FAQ
Why there is an RP2040 on the board and what does it do?
The RP2040 on the carrier board is contolling 5V/SATA power on and off. More specifically, it detects whether the voltage of each power supply is normal or not, and controls buzzer alarm when the test voltage deviation is greater than ±5%.
The J17 and J14 are all reserved for next-step software programing.