Yamaichi STM32-QFP64 IC Test & Burn-in Socket with board for STM32 microcontroller in QFP64(0.5mm pitch) package

Artikelnummer: WS20020

Kategorie: Programmieradapter

89,24 €

inkl. 19% USt.,

ab Stückpreis
5 80,31 €
10 75,85 €
Lange Lieferzeit beachten!

Lieferfrist: ca. 22 - 24 Tage


Yamaichi IC Test & Burn-in Socket with a simple board, specifically designed for STM32 microcontroller in QFP64(0.5mm pitch) package


  • 20-pin JTAG/SWD port and/or 4-pin USART1 interface for programming/testing
  • External crystal can be connected via on board socket for system clock
  • Onboard 32.768K crystal oscillator
  • Two LED indicators for testing, which are connected to the I/O pins via jumpers
  • All the MCU pins are accessible on expansion connectors
    • pin header pitch: 2.54mm(100mil)
Supported Devices

STM32 microcontroller in QFP64(0.5mm pitch) package with compatible pinouts:

  • STM32L1xxR series (STM32L151R8, STM32L152RB, etc.)
  • STM32F0xxR series (STM32F051RC, STM32F051RB, etc.)
  • STM32F1xxR series (STM32F103RC, STM32F100RB, etc.)
  • STM32F2xxR series (STM32F207RC, STM32F215RB, etc.)
  • STM32F3xxR series (STM32F303R8, STM32F373RB, etc.)
  • STM32F4xxR series (STM32F407RC, STM32F415RB, etc.)

Config the onboard "Device selection jumpers" according to the device to be programmed.

outline and Dimensions
Unit: mm
Part Number Pitch Pins Applicable IC Dimensions (REF.) Outside Dimensions (REF.)
A x B C x D E F G x H
IC51-0644-807 0.5 64 10.0 x 10.0 12.0 x 12.0 11.3 - 32.0 x 35.0
  1. JTAG/SWD port
    • for programming/debugging/testing
    • compatible with ST-LINK / J-LINK / ULINK2 / STX-RLINK
  2. USART1 port
    • supports ISP and/or serial port debugging
  3. LED indicators
    • for quick testing
  4. Pin headers connected to MCU pins
    • clearly labeled with onboard marks
    • easy for testing and further expansion
  5. Boot mode configuration
    • configuring the BOOT0 and BOOT1 via jumpers
  6. 3.3V onboard regulator
    • AMS1117-3.3
  7. 5V power input
    • DC jack or 2-pin header
  8. External crystal socket
    • insert crystal to the holes on two sides, leave alone the middle hole
  9. Power indicator
  10. Device selection jumpers
    • short the upper headers for STM32F1xx / STM32L1xx / STM32F05x / STM32F3xx
    • short the lower headers for STM32F2xx / STM32F4xx
  11. LED jumpers
    • short the jumpers to connect LEDs to MCU I/O pins for testing
    • open the jumpers to disconnect
  12. 32.768K crystal (on bottom side)
    • for internal RTC with calibration

JTAG/SWD Connector Layout

The STM32-QFP64 houses JTAG/SWD headers for connecting a programmer. The connector layout is shown in the figure 1 below.

JTAG/SWD connector layoutFigure 1. JTAG/SWD connector layout

Boot Mode Configuration

Depending on the used pin configuration, the Flash memory, system memory or SRAM is selected as the boot space, as shown in Table 1 below.

STM32 boot mode configuration


Development resources:schematic, etc. Wiki: www.waveshare.com/wiki/STM32-QFP64

Weight: 0.09 kg

  1. STM32-QFP64 × 1
  2. USB power cable × 1

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:


Kunden kauften dazu folgende Produkte
STM32F4DISCOVERY Discovery kit with STM32F407VG MCU 1MB... STM32F4DISCOVERY Discovery kit with STM32F407VG MCU 1MB...
sofort verfügbar
STMicroelectronics STM32F3DISCOVERY with STM32F303VC MCU... STMicroelectronics STM32F3DISCOVERY with STM32F303VC MCU...
sofort verfügbar