Waveshare Port103V Development Board Cortex M3 Entwicklungskit STM32 STM32F103VET6

Item number: WS01270

SKU: Port103V

O64

Category: STM32


22,60 €

including 19% VAT.,

Available now!

Shipping time: 1 - 3 workdays

package


Description

STM32 development board, features the STM32F103VET6 MCU, full IO expander, JTAG/SWD debug interface
 

STM32F103VET6 development boardOverview

Port103V is a STM32 development board that features a STM32F103VET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Note: Optional accessory boards are NOT included in the price.


What's On Board

STM32F103VET6 development board on board resource
  1. STM32F103VET6: the high performance STM32 MCU which features
    • Core: Cortex-M3 32-bit RISC
    • Operating frequency: 72MHz, 1.25 DMIPS/MHz
    • Operating voltage: 2-3.6V
    • Package: LQFP100
    • I/Os: 80
    • Memories: 512K Flash, 64K RAM (the highest specification in STM32F103V series)
    • MCU communication interfaces:
      • 3xSPI, 5xUSART, 2xI2S, 2xI2C, 1xFSMC, 1xLCD, 1xSDIO, 1xUSB, 1xCAN
    • AD & DA converters: 3xAD(12bit, 1µs, shares 16 channels); 2xDA(12bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
  1. Power indicator
  2. LEDs: Convenient for indicating I/O status or program debugging running state
  3. Reset button
  4. User keys
  5. Joystick: five positions
  6. 8M crystal oscillator: enables the MCU run at 72M frequency by frequency multiplication
  7. 32.768K crystal, used for internal RTC, also supports clock calibration
  8. JTAG/SWD interface: for debugging/programming
  9. USB FS device interface, used for establishing USB communication between PC and the STM32 development board
  10. UART1 connector, supports ISP (In-System Programming) through UART1, as well as system signal output
  11. IO expander, all the MCU pins are accessible on expansion connectors for further expansion
  12. Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board
  13. 5V DC power jack
  14. Boot mode selection: for configuring the BOOT0 and BOOT1 pins
  15. Power supply switch, powered from 5V DC jack or USB connection
  16. USB enable jumper
    • Short the jumper to enable the PC auto detection while USB connecting
    • Open the jumper to disable
  17. VBAT selection jumper
    • Short the jumper to use system power supply
    • Open the jumper to connect the VBAT to external power, such as battery
  18. VREF jumper
    • Short the jumper to connect VREF+/VREF- respectively to VCC/GND
    • Open the jumper to connect VREF+/VREF- to other custom pins via jumper wires
  19. User LEDs jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  20. User keys jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  21. Joystick jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires

Note:
Accessory board and programmer/debugger in the photos are NOT included in the price.
Port103V supports programming through UART port without programmer.
Port103V provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.


JTAG/SWD Interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

Port103V development board comes with a User Guide CD including development resources listed as below:

  • Related softwares (KEIL etc.)
  • Examples in C
  • Schematic (PDF)
  • Development documentations

Dimensions

 STM32 MCU core board dimensions

Package Contains

  1. Port103V Development Board x 1
  2. USB type A to Mini-B cable x 1
  3. USB Power Cable x 1
  4. 4-pin wire x 2
  5. 2-pin wire x 2
  6. User Guide CD x 1

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item