Waveshare Port103V STM32 Cortex M3 STM32F103V Development Board Entwicklungskit

Artikelnummer: WS01270

Port103V is a STM32 development board that features a STM32F103VET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Kategorie: STM32


19,95 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage

Packung


Beschreibung

STM32 development board, features the STM32F103VET6 MCU, full IO expander, JTAG/SWD debug interface
 

STM32F103VET6 development boardOverview

Port103V is a STM32 development board that features a STM32F103VET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Note: Optional accessory boards are NOT included in the price.


What's On Board

STM32F103VET6 development board on board resource
  1. STM32F103VET6: the high performance STM32 MCU which features
    • Core: Cortex-M3 32-bit RISC
    • Operating frequency: 72MHz, 1.25 DMIPS/MHz
    • Operating voltage: 2-3.6V
    • Package: LQFP100
    • I/Os: 80
    • Memories: 512K Flash, 64K RAM (the highest specification in STM32F103V series)
    • MCU communication interfaces:
      • 3xSPI, 5xUSART, 2xI2S, 2xI2C, 1xFSMC, 1xLCD, 1xSDIO, 1xUSB, 1xCAN
    • AD & DA converters: 3xAD(12bit, 1µs, shares 16 channels); 2xDA(12bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
  1. Power indicator
  2. LEDs: Convenient for indicating I/O status or program debugging running state
  3. Reset button
  4. User keys
  5. Joystick: five positions
  6. 8M crystal oscillator: enables the MCU run at 72M frequency by frequency multiplication
  7. 32.768K crystal, used for internal RTC, also supports clock calibration
  8. JTAG/SWD interface: for debugging/programming
  9. USB FS device interface, used for establishing USB communication between PC and the STM32 development board
  10. UART1 connector, supports ISP (In-System Programming) through UART1, as well as system signal output
  11. IO expander, all the MCU pins are accessible on expansion connectors for further expansion
  12. Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board
  13. 5V DC power jack
  14. Boot mode selection: for configuring the BOOT0 and BOOT1 pins
  15. Power supply switch, powered from 5V DC jack or USB connection
  16. USB enable jumper
    • Short the jumper to enable the PC auto detection while USB connecting
    • Open the jumper to disable
  17. VBAT selection jumper
    • Short the jumper to use system power supply
    • Open the jumper to connect the VBAT to external power, such as battery
  18. VREF jumper
    • Short the jumper to connect VREF+/VREF- respectively to VCC/GND
    • Open the jumper to connect VREF+/VREF- to other custom pins via jumper wires
  19. User LEDs jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  20. User keys jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  21. Joystick jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires

Note:
Accessory board and programmer/debugger in the photos are NOT included in the price.
Port103V supports programming through UART port without programmer.
Port103V provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.


JTAG/SWD Interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

Port103V development board comes with a User Guide CD including development resources listed as below:

  • Related softwares (KEIL etc.)
  • Examples in C
  • Schematic (PDF)
  • Development documentations

Dimensions

 STM32 MCU core board dimensions

Package Contains

  1. Port103V Development Board x 1
  2. USB type A to Mini-B cable x 1
  3. USB Power Cable x 1
  4. 4-pin wire x 2
  5. 2-pin wire x 2
  6. User Guide CD x 1

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

ähnliche Produkte:
Waveshare Core103V Development Core Board STM32 Cortex M3... Waveshare Core103V Development Core Board STM32 Cortex M3...
sofort verfügbar
Waveshare Open103V STM32 Cortex M3 STM32F103V Development... Waveshare Open103V STM32 Cortex M3 STM32F103V Development...
Lange Lieferzeit beachten!
Waveshare Open103V STM32 Cortex M3 STM32F103V Development... Waveshare Open103V STM32 Cortex M3 STM32F103V Development...
Lange Lieferzeit beachten!
Waveshare Open103V STM32 Cortex M3 STM32F103V Development... Waveshare Open103V STM32 Cortex M3 STM32F103V Development...
sofort verfügbar
Waveshare Port103V STM32 Cortex M3 STM32F103V Development... Waveshare Port103V STM32 Cortex M3 STM32F103V Development...
sofort verfügbar
Kunden kauften dazu folgende Produkte
HC-05 Wireless Bluetooth Transceiver Modul RS232 TTL... HC-05 Wireless Bluetooth Transceiver Modul RS232 TTL...
sofort verfügbar
Soil Moisture Hygrometer Detection Feuchtigkeitssensor... Soil Moisture Hygrometer Detection Feuchtigkeitssensor...
sofort verfügbar
Waveshare Open103V STM32 Cortex M3 STM32F103V Development... Waveshare Open103V STM32 Cortex M3 STM32F103V Development...
Lange Lieferzeit beachten!