Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Artikelnummer: PO3132

EAN: 4060137041389

Hersteller-Artikelnr.: 3132

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and male headers and terminal blocks are included but not soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).

Kategorie: Schrittmotorentreiber


25,95 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage



Beschreibung

Overview

The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces?USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial?and offer many settings that can be configured using our free configuration utility (for Windows, Linux, and macOS). This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Tic to a computer).

The Tic family currently has two members: the Tic T825, which operates from 8.5 V to 45 V, and the Tic T834, which operates from 2.5 V to 10.8 V. Both can deliver up to 1.5 A continuous per phase without a heat sink or forced air flow.

Features and specifications

  • Open-loop speed or position control of one bipolar stepper motor
  • A variety of control interfaces:
    • USB for direct connection to a computer
    • TTL serial operating at 5 V for use with a microcontroller
    • I²C for use with a microcontroller
    • RC hobby servo pulses for use in an RC system
    • Analog voltage for use with a potentiometer or analog joystick
    • Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
    • STEP/DIR inputs for compatibility with existing stepper motor control firmware
  • Acceleration and deceleration limiting
  • Maximum stepper speed: 50,000 steps per second
  • Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
  • Six different microstep resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
  • Digitally adjustable current limit
  • Optional safety controls to avoid unexpectedly powering the motor
  • Input calibration (learning) and adjustable scaling degree for analog and RC signals
  • 5 V regulator (no external logic voltage supply needed)
  • Optional kill switch inputs
  • Connects to a computer through USB via a USB A to Micro-B cable(not included)
  • Free configuration software available for Windows, Linux, and macOS

Dimensions

Size: 38mm × 27mm × 10,7mm
Weight: 5.1 g

General specifications

Model: Tic T834
Motor driver: DRV8834
Control interface: USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage: 2.5 V
Maximum operating voltage: 10.8 V
Continuous current per phase: 1.5 A
Maximum current per phase: 2 A
Maximum step rate: 50000 PPS
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection?: Y
Header pins soldered: Y

File downloads

Packagelist

1x Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

ähnliche Produkte:
Pololu Tic T834 USB Multi-Interface Stepper Motor Controller Pololu Tic T834 USB Multi-Interface Stepper Motor Controller
sofort verfügbar
Kunden kauften dazu folgende Produkte
FEETECH FS90R Micro Continuous Rotation Servo FEETECH FS90R Micro Continuous Rotation Servo
sofort verfügbar
Makeblock 42BYG Stepper Motor Bracket B-Blue Makeblock 42BYG Stepper Motor Bracket B-Blue
sofort verfügbar
UNO R3 Arduino Starter Kit (B) Motor LCD Dotmatrix... UNO R3 Arduino Starter Kit (B) Motor LCD Dotmatrix...
sofort verfügbar
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3... Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3...
sofort verfügbar
65 Pcs Breadboard Steckbrücken Drahtbrücken flexibel... 65 Pcs Breadboard Steckbrücken Drahtbrücken flexibel...
sofort verfügbar
10x Test clip hoops Cable 10x Test clip hoops Cable
sofort verfügbar