Pololu Tic T500 USB Multi-Interface Stepper Motor Controller

Artikelnummer: PO3135

EAN: 4060137044663

HAN: 3135

Herkunftsland: US

TARIC-Code: 85423111000

Kategorie: Tic Schrittmotor Controllers


17,90 €

inkl. 16% USt.,

Alter Preis: 21,59 €
sofort verfügbar

Lieferfrist: ca. 1 - 3 Tage

Pack


Beschreibung

The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial. They also offer many settings that can be configured using our free configuration utility (for Windows, Linux, and macOS). This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Tic to a computer).

Features:

  • Open-loop speed or position control of one bipolar stepper motor
  • A variety of control interfaces:
    • USB for direct connection to a computer
    • TTL serial operating at 5 V for use with a microcontroller
    • I²C for use with a microcontroller
    • RC hobby servo pulses for use in an RC system
    • Analog voltage for use with a potentiometer or analog joystick
    • Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
    • STEP/DIR inputs for compatibility with existing stepper motor control firmware
  • Acceleration and deceleration limiting
  • Maximum stepper speed: 50,000 steps per second
  • Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
  • Up to six different microstep resolutions:
    • The Tic T825 and Tic T834 supports full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
    • The Tic T500 supports full step, half step, 1/4 step, 1/8 step
  • Digitally adjustable current limit
  • Optional safety controls to avoid unexpectedly powering the motor
  • Input calibration (learning) and adjustable scaling degree for analog and RC signals
  • 5 V regulator (no external logic voltage supply needed)
  • Optional kill switch inputs
  • Connects to a computer through USB via a USB A to Micro-B cable(not included)
  • Free configuration software available for Windows, Linux, and macOS

Package contains:

1x Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Dokumente

Tic Stepper Motor Controller User's Guide

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:


Diese Modul passt zu folgende Produkten:
HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB... HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB...
sofort verfügbar
Pololu Stepper Motor NEMA 17 Bipolar 200 Steps Rev... Pololu Stepper Motor NEMA 17 Bipolar 200 Steps Rev...
momentan nicht verfügbar
Pololu Stepper Motor NEMA 23 Unipolar Bipolar 200 Steps... Pololu Stepper Motor NEMA 23 Unipolar Bipolar 200 Steps...
sofort verfügbar
Pololu Stepper Motor NEMA 8 Bipolar 200 Steps Rev 20×30mm... Pololu Stepper Motor NEMA 8 Bipolar 200 Steps Rev 20×30mm...
sofort verfügbar
ähnliche Produkte:
Pololu Tic T500 USB Multi-Interface Stepper Motor... Pololu Tic T500 USB Multi-Interface Stepper Motor...
sofort verfügbar
Kunden kauften dazu folgende Produkte
Pololu Stepper Motor NEMA 17 Unipolar Bipolar 200... Pololu Stepper Motor NEMA 17 Unipolar Bipolar 200...
sofort verfügbar
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3... Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3...
sofort verfügbar
Photowiderstand Modul (kurz) Umgebungshelligkeit...
sofort verfügbar