Pololu RoboClaw 2x7A Motor Controller (V5B)

Artikelnummer: PO3284

EAN: 4060137032134

Hersteller-Artikelnr.: 3284

Kategorie: Kontroller


83,24 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage



Beschreibung

Overview

The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor controller. It can supply two brushed DC motors with 7.5 A, 15 A, 30 A, 45 A, or 60 A continuous (depending on the model) at voltages from 6 V to 34 V, and it allows for peak currents up to twice the maximum continuous rating.

The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies, or the encoder counts and speeds can be read directly from the RoboClaw for use with an external control system. Analog feedback is also supported for closed-loop position control.

The RoboClaw has a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer. Several other interface modes are supported by the RoboClaw as well: it can be controlled via TTL serial for use with an embedded system, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), or analog voltages for use with potentiometers or analog joysticks.

Key Features

  • Simple bidirectional control of two brushed DC motors
  • 6 V to 34 V operating supply range
  • 7.5 A to 60 A maximum continuous current output, depending on controller model
  • Automatic current limiting reduces duty cycle when motor current is between 1× and 2× the controller?s rated current
  • Four communication or control options:
    1. USB serial interface (virtual COM port)
    2. Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers
    3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller
    4. 0 V to 2 V (5 V tolerant) analog voltage interface for direct connection to potentiometers and analog joysticks
  • Dual feedback inputs for PID closed-loop control:
    • Speed or position control with quadrature encoders, up to 19.6 million encoder pulses per second
    • Position control with analog encoders or potentiometers
    • (Open-loop control with no feedback also available)
  • Screw terminals for quick connect/disconnect
  • Configurable via pushbutton interface
  • Regenerative braking
  • Tolerates high-speed direction changes
  • Jumper-selectable 5 V BEC
  • Battery monitoring and under-voltage cutoff protects batteries from over-discharging

Dimensions

Size:1.7" × 1.9" × 0.7"1

Weight:18 g1

General specifications

Motor channels: 2
Control interface: USB; non-inverted TTL serial (2-way);
RC servo pulses; analog voltage
Minimum operating voltage: 6 V
Maximum operating voltage: 34 V
Continuous output current per channel: 7.5 A
Peak output current per channel: 15 A

Notes:

1
Not including the case.
2
Available baud rates are 2400, 9600, 19,200, and 38,400 bps.

Recommended links

RoboClaw motor controller user manual
User manual for the RoboClaw brushed DC motor controllers.
RoboClaw Motor Controller resources
Go here to find links to all of the downloadable RoboClaw resources, including datasheets, drivers, source code libraries, and CAD drawings.

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

Kunden kauften dazu folgende Produkte
Makeblock Fully Threaded Rod M4*288mm (Pair) Makeblock Fully Threaded Rod M4*288mm (Pair)
sofort verfügbar
Makeblock Bracket L1-Blue (Pair) Makeblock Bracket L1-Blue (Pair)
Lange Lieferzeit beachten!
Makeblock 42BYG Stepper Motor Bracket B-Blue Makeblock 42BYG Stepper Motor Bracket B-Blue
sofort verfügbar
Makeblock Thread Drive Pack V2.0-Blue Makeblock Thread Drive Pack V2.0-Blue
sofort verfügbar
Makeblock Beam0808 Robot Pack					-Blue
sofort verfügbar
Makeblock Linear Motion Shaft D4x80mm(Pair) Makeblock Linear Motion Shaft D4x80mm(Pair)
sofort verfügbar