Pololu Mini MOSFET Slide Switch with Reverse Voltage Protection, LV

Item number: PO2810

This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 6 A at 2 V to 20 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital output of a microcontroller.

Category: Pololu Power Switches


3,90 €

including 19% VAT.,

Available now!

Shipping time: 1 - 2 workdays



Description

Overview

This product is a power switch implemented as a pair of P-channel MOSFETs configured as a high-side switch with reverse voltage protection and controlled by a micro slide switch. Because the main current does not go through the controlling mechanical switch, a variety of switches can be used without concern for the current they can carry. For example, a small slide or toggle switch can be mounted conveniently on a control panel with thin wires running to it, while the main power path can be shorter and with thicker wires. Pushbutton or tactile switches can also be used for momentary switching applications.

Unlike the Pololu Pushbutton Power Switches, which can lose their state when power is disconnected and reapplied, the conducting state of the MOSFET Slide Switches is determined only by the physical control switch (or a signal supplied to the ?ON? pin), independent of power applied to the board. This can make them more appropriate for applications where the supplied power may be intermittent.

Warning: Do not use this switch as an emergency cutoff or similar safety disconnect in applications where failure to cut power could lead to injury or property damage.

Four versions of the MOSFET slide switches are available:

  • Mini Pushbutton Power Switch LV
  • Mini Pushbutton Power Switch SV
  • Big Pushbutton Power Switch MP
  • Big Pushbutton Power Switch HP

The two Mini MOSFET Slide Switches are smaller, lower-current versions that are useful for applications with tight size constraints or lower power requirements. Also, the the Mini LV is the only one of the four that works below 4.5 V; since it can operate down to 1.8 V, this version can be used with a single lithium cell battery.

The pinout of the Big version is the same as the pinout of the Mini version with several additional redundant connection points for convenience, including main power connections that are compatible with 5 mm terminal blocks.

Documents

User Guide

Ratings (1)

Average product review

Share your experience with other customers:


Other customers have also bought the following items
Pololu Mini Pushbutton Power Switch with Reverse Voltage... Pololu Mini Pushbutton Power Switch with Reverse Voltage...
Available now!
LM2596S DC-DC einstellbarer Step-Down Spannungsregler mit... LM2596S DC-DC einstellbarer Step-Down Spannungsregler mit...
Available now!
Pololu Mini Slide Switch: 3-Pin, SPDT, 0.3A (3-Pack) Pololu Mini Slide Switch: 3-Pin, SPDT, 0.3A (3-Pack)
Available now!
Jumper Wire 10x1P female to male 20cm Jumper Wire 10x1P female to male 20cm
Available now!
Jumper Wire 10x1P male to male 20cm
Available now!
HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB... HIMALAYA basic UNO R3 ATmega328P Board ATmega16U2 mit USB...
Available now!