Pololu Jrk G2 18v27 USB Motor Controller with Feedback

Artikelnummer: PO3148

EAN: 4060137048333

HAN: 3148

Herkunftsland: US

UPC: 802237904

TARIC-Code: 85423111000

Kategorie: SALE %

102,31 €

inkl. 16% USt.,

Alter Preis: 162,27 €
sofort verfügbar

Lieferfrist: ca. 1 - 3 Tage




With integrated support for analog voltage or tachometer (frequency) feedback, the second-generation G2 family of Jrk motor controllers makes it easy to add closed-loop control of speed or position (but not both!) of a single brushed DC motor to a variety of projects. These versatile, general-purpose modules support five different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, and analog voltages for use with a potentiometer or analog joystick. They also offer many settings that can be configured using our free configuration software utility for Windows, Linux, and macOS. This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Jrk G2 to a computer).

Main features of the Jrk G2 family

  • Easy open-loop or closed-loop control of one brushed DC motor
  • A variety of control interfaces:
    • USB for direct connection to a computer
    • TTL serial operating at 5 V for use with a microcontroller
    • I²C for use with a microcontroller
    • RC hobby servo pulses for use in an RC system
    • Analog voltage for use with a potentiometer or analog joystick
  • Feedback options:
    • Analog voltage (0 V to 5 V), for making a closed-loop servo system
    • Frequency pulse counting (for higher-frequency feedback) or pulse timing (for lower-frequency feedback), for closed-loop speed control
    • None, for open-loop speed control
    • Note: the Jrk does not support using quadrature encoders for position control
  • Ultrasonic 20 kHz PWM for quieter operation (can be configured to use 5 kHz instead)
  • Simple configuration and calibration over USB with free configuration software utility (for Windows, Linux, and macOS)
  • Configurable parameters include:
    • PID period and PID coefficients (feedback tuning parameters)
    • Maximum current
    • Maximum duty cycle
    • Maximum acceleration and deceleration
    • Error response
    • Input calibration (learning) for analog and RC control
  • Optional CRC error detection eliminates communication errors caused by noise or software faults
  • Reversed-power protection
  • Field-upgradeable firmware
  • Optional feedback potentiometer disconnect detection


Size: 1.2" × 1.7" × 0.42"1
Weight: 10 g1

General specifications

Motor channels: 1
Control interface: USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage
Minimum operating voltage: 6.5 V
Maximum operating voltage: 30 V2
Continuous output current per channel: 27 A3
Maximum PWM frequency: 20 kHz
Reverse voltage protection?: Y
Version: G2 18v27 (30 V max, 27 A max continuous)


1 Without included hardware.
2 Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 24 V, which leaves a safety margin for ripple voltage on the supply line. Not recommended for use with 24V batteries.
3 Typical results at room temperature with both channels running at 90% duty cycle.

Package List

1x Jrk G2 18v27 USB Motor Controller with Feedback




Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

ähnliche Produkte:
Pololu Jrk G2 18v19 USB Motor Controller with Feedback Pololu Jrk G2 18v19 USB Motor Controller with Feedback

Pololu Jrk G2 18v19 USB Motor Controller with Feedback

68,21 € *
Alter Preis: 108,16 €
sofort verfügbar