Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled)

Item number: PO1394

Manufacturer Part Number: 1394

The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8?28 V, with derated performance down to 5 V and transient protection to 40 V. The board ships with connectors installed as shown (no soldering required).

Category: Motors


48,79 €

including 19% VAT.,

Please note the long delivery time!

Shipping time: 8 - 9 workdays

pcs


Description

Overview

The jrk 21v3 is a versatile, general-purpose motor controller that supports a variety of interfaces, including USB. The broad operating range from 5 V to 28 V and continuous output current of 3 A (5 A peak) allow this board to control most small DC brushed motors. Analog voltage and tachometer (frequency) feedback options allow quick implementation of closed-loop servo systems, and a free configuration utility (for Windows) allows easy calibration and configuration through the USB port.

Key improvements over competing products and earlier Pololu motor controllers with feedback include:

  • USB connectivity with emulated serial (COM) port allows direct motor control from a PC.
  • Ultrasonic PWM to eliminate switching-induced motor shaft hum or whine.
  • Robust, high-speed communication protocol with user-configurable error condition response.
  • High internal resolution (12 bits) for smooth and flexible calibration to various input and feedback devices.
  • Current sensing and limiting.
  • Reversed power protection.
  • Field-upgradeable firmware.

Note: A USB A to mini-B cable (not included) is required to connect this controller to a computer.

Main Features of the Jrk 21v3

  • Simple bidirectional control of one DC brush motor.
  • 5 V to 28 V operating supply range.
  • 3 A maximum continuous current output (5 A peak).
  • Four communication or control options:
    1. USB interface for direct connection to a PC.
    2. Full-duplex, TTL-level asynchronous serial interface for direct connection to microcontrollers or other embedded controllers.
    3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller.
    4. 0–5 V analog voltage interface for direct connection to potentiometers and analog joysticks.
  • Two closed-loop feedback options:
    1. 0–5 V analog voltage.
    2. Frequency/tachometer digital input up to 2 MHz with 1 ms PID period.
      (Open-loop control with no feedback also available.
    • PID period and PID constants (feedback tuning parameters).
    • Maximum current.
    • Maximum duty cycle.
    • Maximum acceleration.
    • Error response.
    • Input calibration (learning) for analog and RC control.
  • Optional CRC error detection eliminates communication errors caused by noise or software faults.
  • Reversed power protection.
  • Field-upgradeable firmware.
  • Optional feedback potentiometer disconnect detection.
  • Comprehensive user’s guide.

Document


Product weight: 0,01 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Contact
Question on item
max. 500 characters

Pololu MC33926 Motor Driver Carrier Pololu MC33926 Motor Driver Carrier
Available now!
Pololu Micro Maestro 6-Channel USB Servo Controller... Pololu Micro Maestro 6-Channel USB Servo Controller...
Available now!
Other customers have also bought the following items
V-TEC Turbine Getriebemotor Dual Welle 24V 16 U min
Please note the long delivery time!
V-TEC 24V 6mm Bürstenlose DC Motor Gleichstrom Turbine... V-TEC 24V 6mm Bürstenlose DC Motor Gleichstrom Turbine...
Please note the long delivery time!
Pololu Simple High-Power Motor Controller 24V 12A (fully...
Available now!
GY-291 Accelerometer 3-Achsen Beschleunigungssensor... GY-291 Accelerometer 3-Achsen Beschleunigungssensor...
Available now!
V-TEC 12V 7mm Dual Antriebwelle DC Motor Gleichstrom... V-TEC 12V 7mm Dual Antriebwelle DC Motor Gleichstrom...
Available now!