Pololu 3V 5A to 12V Step-Up Spannungsregler U3V50F12

Item number: PO2568

This powerful boost regulator efficiently generates an output voltage of 12V from an input voltage as low as 2.9V while allowing an input current as high as 5A.

Category: Step-Up Voltage Regulator


14,78 €

including 19% VAT.,

Available now!

Shipping time: 1 - 3 workdays



Description

Overview

These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.9 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 95%. The available output current is a function of the input voltage, output voltage, and efficiency (see the Typical Efficiency and Output Current section below), but the input current can typically be as high as 5 A. This regulator is available with a fixed 5 V, 6 V, 9 V, 12 V, or 24 V output:

The U3V50x regulator family also includes two adjustable-output versions: the U3V50ALV offers an output range of 4 V to 12 V and the U3V50AHV offers an output range of 9 V to 30 V. The different versions of the board all look very similar, so the bottom silkscreen includes a blank space where you can add your own distinguishing marks or labels.

The no-load quiescent current depends on the difference between the input and the output voltage. When the two are close, the quiescent current can be less then a milliamp (e.g. 0.6 mA with 5 V in and 6 V out); when the two are far apart, it might be in the tens of milliamps (e.g. 24 mA with 3 V in and 24 V out). The ENABLE pin can be used to put the board in a low-power state that reduces the quiescent current to approximately 20 µA per volt on VIN.

This regulator has built-in reverse-voltage protection, over-current protection, thermal shutdown (which typically activates at 165°C), and an under-voltage lockout that causes the regulator to turn off when the input voltage is below 2.5 V (typical).

Features

  • Input voltage: 2.9 V to VOUT
  • Fixed 5 V, 6 V, 9 V, 12 V or 24 V output with 4% accuracy
  • 5 A switch allows for input currents up to 5 A
  • Integrated reverse-voltage protection, over-current protection, over-temperature shutoff, and under-voltage lockout
  • Typical efficiency of 80% to 95%, depending on input voltage, output voltage, and load
  • Compact size: 1.9" × 0.6" × 0.41" (48 × 15 × 10.5 mm)
  • Two mounting holes for #2 or M2 screws
  • Smaller holes for 0.1" header pins and larger holes for terminal blocks offer several options for connecting to the board

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:


Pololu Rocker Switch: 3-Pin, SPDT, 10A Pololu Rocker Switch: 3-Pin, SPDT, 10A
Available now!
Other customers have also bought the following items
Adafruit PowerBoost 1000 Charger - Rechargeable 5V Lipo... Adafruit PowerBoost 1000 Charger - Rechargeable 5V Lipo...
Available now!
MT3608 DC-DC Adjustable Step-up Spannungsregler Boost... MT3608 DC-DC Adjustable Step-up Spannungsregler Boost...
Available now!
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2500mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2500mAh...
Available now!
Pololu Mini MOSFET Slide Switch with Reverse Voltage... Pololu Mini MOSFET Slide Switch with Reverse Voltage...
Available now!