Pololu 12V Step-Up Step-Down Spannungsregler S10V2F12

Item number: PO2096

Manufacturer Part Number: 2096

This switching regulator uses the SEPIC topology to produce 12?V from input voltages between 2.5?V and 18?V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 12?V. The compact (0.4???0.575?) module can supply over 200?mA in typical applications.

Category: Power supply


4,49 €

including 19% VAT.,

Available now!

Shipping time: 1 - 2 workdays



Description

This switching regulator uses the SEPIC topology to produce 12 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 12 V. The compact (0.4" × 0.575") module can supply over 200 mA in typical applications.

Overview

The Pololu step-up/step-down voltage regulator S10V2F12 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) with a single-ended primary-inductor converter (SEPIC) topology. It takes an input voltage from 2.5 V to 18 V and increases or decreases the voltage to a fixed 12 V output with a typical efficiency of 70% to 80%.

This flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above 12 V and drops below as the battery discharges. Since it lacks the typical restriction that the battery voltage stay above the required voltage throughout its life, new battery packs and form factors can be considered.

In typical applications, this regulator can deliver over 200 mA continuous; please see the graphs at the bottom of this page for a more detailed characterization. The regulator’s thermal shutdown prevents damage from overheating, but it does nothave short-circuit or reverse-voltage protection.

This regulator is also available with a fixed 5 V output or a fixed 9 V output.

Features

  • Input voltage: 2.5 V to 18 V (can be higher than, the same as, or lower than the 12 V output)
  • Fixed 12 V output with 4% accuracy
  • Typical continuous output current: 200 mA (actual continuous output current depends on input voltage; see Typical Efficiency and Output Current section below for details)
  • <2 mA typical no-load quiescent current
  • Integrated over-temperature shutoff
  • Small size: 0.40" × 0.575"× 0.1" (10 mm × 15 mm × 3 mm)

Using the Regulator


Product weight:0,00 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Contact
Question on item
max. 500 characters

Buy this product now with our bundled offerings

Price for all: 4,49 €
You save: 0,00 €