Pimoroni OnOff SHIM Super Small Board 1mm Thick PCB Micro-B Connector up to 2.5A

Item number: RP01038

Add a tiny yet convenient power switch to your Pi with OnOff SHIM!

Category: Pimoroni


7,14 €

including 19% VAT.,

Please note the long delivery time!

Shipping time: 6 - 8 workdays



Description

Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you can use them with HATs and pHATs on top.

Usage

Just plug your micro-USB power supply into the micro-B connector on OnOff SHIM, and then press the button once to switch on power and boot up your Pi. After installing our software (details below), you can press and hold the button for one second to initiate a clean shutdown and completely cut the power to your Pi.

Features

  • Super-small SHIM-format board
  • 0.8mm thick PCB
  • Can be used with HATs and pHATs
  • Corner-mounted push button for on/off
  • Micro-B connector for power supply
  • Red status LED
  • Optional breakout pins to connect an external momentary button
  • 2x6 female header included
  • Supports up to 2.5A power supply
  • Software daemon to shutdown cleanly
  • Compatible with all 40-pin header Raspberry Pi models
  • Requires soldering

Software

We've put together a one-line-installer to install the clean shutdown daemon. It watches the state of BCM pin 17 and, when pulled low (pressed), it initiates a clean shutdown. Last thing, just before your Pi shuts down, BCM pin 4 is pulled low to completely cut power to your Pi.

To install the software, open a terminal and type curl https://get.pimoroni.com/onoffshim | bash to run the one-line-installer.

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:


Other customers have also bought the following items
600x Metallschicht Metallfilm Widerstände 0,25W (20...
Available now!
Jumper Wire 10x1P female to female 20cm
Please note the long delivery time!
Jumper Wire 10x1P female to male 20cm Jumper Wire 10x1P female to male 20cm
Available now!
Jumper Wire 10x1P male to male 20cm
Available now!
PAM8403 Volume Adjustment 2-Kanal Digital Amplifier... PAM8403 Volume Adjustment 2-Kanal Digital Amplifier...
Available now!
Potentiomètre Roue KY-040 Rotary Codeur Encodeur Taster... Potentiomètre Roue KY-040 Rotary Codeur Encodeur Taster...
Available now!