Adafruit NeoPixel Shield 40 RGBW Natural White LEDs 4500K

Adafruit NeoPixel Shield 40 RGBW Natural White LEDs 4500K

43,95 € (Net 36,93 € )

incl. 19% VAT , plus (XL)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Must be ordered. Ready for shipment in 21 days after order.
Delivery time: 22 - 24 Workdays (DE - int. shipments may differ)

SKU: AF2865
GTIN: 4060137025006
Category: LEDs/Neopixel
Manufacturers: Adafruit
MPN: 2865
Storage Tiers: Maintain

This is the Natural White RGBW version. The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall).

To make it easy to start, the LEDs are by default powered from the 5V onboard Arduino supply. As long as you aren't lighting up all the pixels full power white that should be fine. If you want to power the shield with an external power supply, solder in the included terminal block (pro-tip: put it on the bottom of the board so it doesn't stick up) to wire in an external 4-6VDC power supply - that power supply will also power the Arduino and shield. If you want to use the terminal block to power the shield but keep the Arduino itself on DC or USB power only, cut the center of the solder jumper to the right of the terminal block. There's a polarity protection FET on the external input in case you wire the power backwards.

If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first shield's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 5 or more shields you may run low on RAM if you're using an UNO.

We include both stacking headers and plain headers. Use whichever you prefer - there isn't a lot of space left over for the 'duino pin breakouts so if you want to wire up some other outputs or sensors the stacking headers are good. For a slim sturdy look, solder on the plain headers.

Details

Dimensions:53mm x 69mm x 3mm
Weight: 27.10g

#BBD0E0 »

Storage Tiers:	Maintain
Resolution:	8x5
Color:	Natural White RGB
Energy Efficiency Label:	LED(A++--E)
Shipping weight:	0,03 kg
Item weight:	0,03 kg
Dimensions ( Length × Width × Height ):	6,90 × 5,30 × 0,30 cm
RoHS Certificate:	compliant