Makeblock Socket Cap Screw will be replaced by Button Head Socket Cap Screw gradually, and the tool HEX Screwdriver 3mm will be replaced by HEX Screwdriver 2.5mm.
Button Head Socket Cap Screw is a new kind of Socket Cap Screw, it has smaller head that can solve most problem of interfere with other components.
Thread Drive Pack V2.0 is the improvement version of Thread Drive Pack V1.0. It can be used to build thread drive system.
In this version, all parts in the demo below are included.
Fully Threaded Rod M4x192mm/M4x288mm
- Made of steel, zinc plated.
- Lengh: 192mm/288mm
Linear Motion Shaft 4x288mm
- Made of tainless Steel
- Can drill into 4mm holes. Compatible with Thread Drive Beam
- Lengh: 288mm
Thread Drive Beam
- Made from 6061 aluminum extrusion, anodized surface. Excellent strength and twist resistance.
- With thread hole in the middle that compatible with the Fully Threaded Rod.
- Other holes without thread can be drilled for 4mm shaft.
- Threaded slot enables easy and flexible connection.
- Cross-sectional area 8x8mm, length 80mm.
Universal Joint 4x4mm
- Material: stainless steel
- Max deflection angle: 45°
- Size: D9*F4*F4*M3*L22mm
- 2 Headless Set Screw included.
DC Motor-25 6V/185RPM
Dc motors are the most commonly used motors in Makeblock Platform. With Makeblock DC Motor-25 Brackets, they may be easy to connet to Makeblock structural components.
1. Test condition
1.1. Rated voltage: 6.0 V(DC);
1.2. Ambient temperature:+25±3?;
1.3. Ambient relative:60%±5%;
2. No-load characteristic
2.1 Reductionratio: 1:34 ;
2.2 No load current:? 200 mA
2.3 No load speed: 185 ±10%rpm;
3. Load characteristic
3.1. Rated torque: 1.5±Kg.cm;
3.2. Rated current:? 650 mA;
3.3. Rated speed: 135 ±10%rpm;
3.4. Stall torque: 4.5± kg.cm;
3.5. Stall current:= 2.0 A;
4. Direction of Ratation:CCW
Thrust play of shaft:0.05-0.5 mm;
Radial play of shaft:? 0.02 mm;
|2 x Beam 0824-80|
|2 x Beam 0808-192|
|1 x DC Motor-25 6V/185RPM|
|1 x DC Motor-25 Bracket|
|1 x Universal Joint 4x4mm|
|1 x Threaded Rod M4x192mm|
|1 x Threaded Rod M4x288mm|
|2 x Linear Motion Shaft D4x288mm|
|1 x Thread Drive Beam M4x80|
|10 x Socket Cap Screw M4x14|
|4 x Countersunk Screw M3x8|
|2 x Headless Set Screw M3x5|
|Product weight:||0,30 Kg|