M5Stack LAN Module with W5500 V12 Ethernet TTL to RS485/RS232

M5Stack LAN Module with W5500 V12 Ethernet TTL to RS485/RS232

39,95 € (Net 33,57 €)

incl. 19% VAT , plus (XL)

Choose tax zone / country of delivery

pcs

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 15 - 17 Workdays (Other countries)

SKU: MS01012-B-V12
GTIN: 4060137074653
Category: Ethernet to UART
Manufacturers: M5Stack
MPN: K012-B-V12
Storage Tiers: Maintain

LAN Base is an Ethernet controller base, built-in W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface), supports multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) and integrated storage buffer area to facilitate Ethernet data packet processing. The internal reserved expansion pad can be used to expand the RS485/RS232 communication switch module or add custom designs, standard fixed rails, etc. Accessories, LAN Base with both performance and expansion flexibility can provide you with a more concise embedded Ethernet connection.

Product Features

It can meet the wired network access requirements in the actual production environment.
Designed for industrial application scenarios:
- Provide metal slide rails for easy installation and fixation
- Equipped with HT3.96 terminals for electrical connection
- Support input power voltage: 9-24V
Standard configuration TTL-RS485 + TTL-RS232 two adapter boards, adapt to different communication interfaces.

Specification

Ethernet Controller: W5500
Network port: RJ45 adaptive 10/100M network port
Net weight: 32g
Gross weight: 132g
Product size: 54 * 54 * 28mm
Packing size: 105 * 65 * 40mm

Include

1x LAN Base
1x TTL-RS485 adapter board
1x TTL-RS232 adapter board
1x header 20pin
1x metal rail and disk
3x HT3.96 terminal - 2x 3pin, 1x 4pin
10x cold crimp terminals
3x Allen key
1x 1.5mm
1x 2mm
1x 2.5mm
2x socket head screw M3x28
4x hex socket tapping screws KA2x4
1x countersunk screw M3x8

Note: When using the CORE2 or CORE2-FOR-AWS main control to drive the module, please use the DC power input of the base and set the power mode to input mode (refer to the code below), otherwise it will not start normally.

//mbus_mode_t:

//kMBusModeOutput: use USB or battery power supply

//kMBusModeInput: Use external power supply 5V, or DC interface

M5.begin(true, true, true, false, kMBusModeInput);

//Initialize Serial according to the actual connected pins

Serial2.begin(115200, SERIAL_8N1, 13, 14);