M5Stack FIRE is a cost-effective WiFi & Bluetooth dual-mode IoT controller adopts Espressif ESP32 main control chip, equipped with two low-power Xtensa® 32-bit LX6 microprocessors, with main frequency up to 240MHz. With 8M PSRAM + 16M FLASH memory, 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot and other peripherals.
The full-coverage case ensures circuit stability even in complex industrial applications. The internal offers a wide range of common interface resources (ADC/DAC/I2C/UART/SPI, etc.) which is highly expandable. This functional and powerful IoT controller is very applicable to various product prototyping, industrial control and smart building applications.
Note?GPIO 16 / 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability..
Switching operations?
- Power on?Click the red button on the left
- Power off: Quickly double-click the red button on the left
- USB power: By default, It can not be shutdown when USB power is on.
USB driver
Before using, please go to download page to download the USB driver that matches your operating system, and install it.
Note: FIRE currently has two CP2104/CH9102F A USB chip version, users can install the drivers (CH34x and CP210x) that are compatible with two ICs at the same time to ensure that the device drivers work normally.
Included
- 1x M5Stack FIRE
- 1x M5GO Charging Base
- 2x LEGO Building Blocks
- 5x LEGO Connections
- 1x M3 Hex Wrench
- 1x Type-C USB (50cm)
- 1x User's Manual
Specifications
- ESP32-D0WDQ6-V3: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
- Flash: 16MB
- PSRAM: 8MB
- Input power: 5V @ 500mA
- Interface: TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
- Keys: Custom Keys x 3
- LCD screen: 2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit
- Speaker: 1W-0928
- Microphone: Analog BSE3729 Microphone
- IMU: 6-axis MPU6886
- USB Chip: CH9102F
- LED: SK6812 RGB LED x 10
- Antenna: 2.4G 3D antenna
- Battery: 500 mAh @ 3.7V
- Operating Temperature: 0°C to 40°C
- Net Weight: 62.3g
- Gross Weight: 162g
- Product Dimensions: 54mm x 54mm x 30.5mm
- Package Size: 105mm x 65mm x 40mm
- Cover Material: Plastic ( PC )
