HIMALAYA USB Micro Mini-B Coin Cell TFCard RJ45 Breakout Board with/-out On-Off Switch with/-out Battery Holder

Item number: HL00001

Category: Breakout Boards

With/-out On-Off Switch
With/-out Battery Holder
Type

starting from 2,14 €

including 19% VAT.,

Available now!

There are variations of this item. Please select the variation you wish.


Description

Overview

micro-B USB connector Breakout Board:

This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popular micro-B USB to your project, but don?t want to put up with soldering the tiny connector, this is the board for you.

USB Mini-B Connector Breakout Board:

This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is. 

MicroSD/TF Card Adapter Breakout Board:

This is a Micro SD / TF card adapter breakout board. It is breakout board for auto pop-up TF card connector which is led out to DIP pins(2.54mm pitch). After soldering the pin headers, users can plug it onto the breadboard or solder it on the PCB experiment board to use.It is great for the projects that need TF card.

RJ45 Breakout Board:

This RJ45 Breakout is a simple board that will provide you with a way to put an ethernet port into your breadboard. This rev of the breakout is equipped with the RJ45 connector already soldered to the board which mean you no longer need to solder the connector to the board yourself or worrying about buying them separately!

CR1220 12mm Coin Cell Breakout with On-Off Switch:

This breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

CR2032 20mm Coin Cell Breakout with On-Off Switch:

This sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

 

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:


Other customers have also bought the following items
Pololu USB Micro-B Connector Breakout Board Pololu USB Micro-B Connector Breakout Board
Available now!
Pololu ACS711EX Current Sensor Carrier -15.5A to +15.5A Pololu ACS711EX Current Sensor Carrier -15.5A to +15.5A
Available now!
HIMALAYA Matrix Base Prototyping Add-on Board Doubler for... HIMALAYA Matrix Base Prototyping Add-on Board Doubler for...
Available now!
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 500mAh JST-PH... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 500mAh JST-PH...
Available now!
HIMALAYA basic Nano V3.2 Board Atmega328P Arduino... HIMALAYA basic Nano V3.2 Board Atmega328P Arduino...
Available now!
HIMALAYA 12V 16-Kanal Optocouplers Relay Shield for... HIMALAYA 12V 16-Kanal Optocouplers Relay Shield for...
Available now!