GY-9150 MPU-9150 Nine Axis Electronic Compass Accelerometer Module

Item number: SE05014

SKU: SE05014

B85

Category: Sensors


21,80 €

including 19% VAT.,

Available now!

Shipping time: 1 - 3 workdays

pcs


Description

Summary:
Use Chip: MPU-9150
Power supply :3-5v (internal low dropout regulator)
Communication: IIC communication protocol standard
Chip 16bit AD converter 16 outputs the data (field 13)
Gyro range: ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 1200uT
Using Immersion Gold PCB, machine welding process to ensure quality
Pitch 2.5mm

Shipping Content:
1 x GY-9150 MPU-9150 Nine Axis Electronic Compass Accelerometer Module

Description: 
The 9DOF MPU-9150 is the world?s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.

This breakout board makes it easy to prototype with the InvenSense MPU-9150 by breaking out all the pins you need to standard 0.1" spaced headers. The board also provides I2C pullup resistors and a solder jumper to switch the I2C address of the device.

The MPU-9150 is a System in Package (SiP) that combines two chips: the MPU-6050, which contains a 3-axis gyroscope, and 3-axis accelerometer. The part is offered in a 4x4x1mm LGA package and is upgrade-compatible with the MPU-6050 integrated 6-axis MotionTracking device, providing a simple upgrade path and making it easy to fit on space constrained boards.

Features:

  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  • Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
  • Tri-axis compass with a full scale range of ±1200µT
  • Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometer, gyroscope, and compass
  • VDD Supply voltage range of 2.4V?3.46V; VLOGIC of 1.8V±5% or VDD
  • Gyro operating current: 3.6mA (full power, gyro at all rates)
  • Gyro + Accel operating current: 3.8mA (full power, gyro at all rates, accel at 1kHz sample rate)
  • Gyro + Accel + Compass + DMP operating current: 4.25mA (full power, gyro at all rates, accel at 1kHz sample rate, compass at 8Hz rate)
  • Accel low power mode operating current: 10uA at 1Hz, 20uA at 5Hz, 70uA at 20Hz, 140uA at 40Hz
  • Full Chip Idle Mode Supply Current: 8µA
  • 400kHz Fast Mode I²C serial host interface
  • On-chip timing generator with ±1% frequency variation over full temperature range
  • 10,000g shock tolerant
  • I2C Pullup Resistors populated on board.
  • All Pins Broken Out to Standard 0.1" Spaced Headers
  • Solder Jumper for Switching LSB of I2C Address

Downloads

Development resources: demo codes, schematic, datasheets, etc.
Click here to download


Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item