Description
Übersicht:
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3,3V, There is a voltage regulator on board so it can accept voltage up to 16VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Technische Daten:
- ATMega 32U4 läuft bei 3,3V/8MHz
- Unterstützt Arduino IDE v1.0.3
- On-Board- Mikro -USB-Anschluss für die Programmierung
- 4 x 10 -Bit-ADC Pins
- 12 x Digital I / Os ( 5 PWM- fähig)
- Rx und Tx Hardware Serielle Anschlüsse Unsere Kleinste Arduino -Compatible Vorstands Yet!
- RAW: 7V-9V
- VCC: 3.3V at 500mA
- Maximum current for chip: 200mA
- Maximum current per pin: 40mA
- Recommended current per pin: 20mA
- 8-bit Atmel AVR
- Flash Program Memory: 32kB
- EEPROM: 1kB
- Internal SRAM 2.5kB
- ADC:10-bit
- PWM:8bit
- High Speed PWM with programmable
Pins
Lieferumfang:
1 x Pro Micro - 3,3V/8MHz
