ESP8266 ESP-13 Web Sever WIFI Wireless Shield for Arduino UNO R3

Artikelnummer: CP06041

Hersteller Artikel Nr.: ESP-12E Arduino Shield Web

Kategorie: Funkmodule


13,95 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage



Beschreibung

Übersicht

The shield is designed based on ESP8266, and pin-compatible with Arduino UNO/Mega2560 DevBorad.

WiFi module is industrial-grade chips ESP8266, which is ESP-13 with metal shield, has strong anti-interference ability;

This shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with 3.3V (Esp8266) and 5V (Arduino);

Dual DIP switches is used for serial ports so that this module shield can be used alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board;

Serial data is transported to WiFi device transparently, and vice versa. Arduino program does not need any configuration;

Web Server is developed to configure WiFi parameters and serial port parameters;

This shield can be used as an independent ESP8266 development board. for instance, downloading the official AT commands firmware, NodeMCU open source firmware can be used;

This shield also can be used as stand-alone expansion board for Arduino Uno

Technische Daten

802.11 b / g / n wireless standards;

STA / AP modes support ;

TCP / IP protocol stack, One socket;

Supports standard TCP / UDP Server and Client;

Supports serial port baud rate configuration: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;

Supports serial data bits: 5/6/7/8 bits;

Supports serial parity: none;

Supports serial stop bits: 1/2 bit;

Pin-compatible with Arduino UNO, Mega;

Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;

ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / * UART TX / UART RX;

KEY button: modes configuration;

Dual-Ports DIP switches: switching Arduino and ESP8266;

WiFi operation current: continuous transmission operation: ?70mA (200mA MAX), idle mode: <200uA;

Serial WiFi transmission rate: 110-460800bps;

Temperature: -40°C ~ + 125°C;

Humidity: 10 percent-90 degree non-condensing;

Lieferumfang

1x ESP8266 ESP-13 Web Sever Serial WiFi Shield Expansion Board for UNO R3

1. Downloads: Allgemeine Dokumente für ESP8266.

Development resources: demo codes, schematic, datasheets, etc.
Click here to download

 


Artikelgewicht:0,02 Kg

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

Kunden kauften dazu folgende Produkte
USB Host Shield compatible with UNO Arduino Google... USB Host Shield compatible with UNO Arduino Google...
sofort verfügbar
Pololu 3.3V, 500mA Step-Down Spannungsregler D24V5F3 Pololu 3.3V, 500mA Step-Down Spannungsregler D24V5F3
sofort verfügbar
SparkFun Rotary Encoder - Illuminated (with RGB LED) SparkFun Rotary Encoder - Illuminated (with RGB LED)
sofort verfügbar
I2C 1602 Serial Blue LCD Display Module 5V 16x2 Zeichen... I2C 1602 Serial Blue LCD Display Module 5V 16x2 Zeichen...
sofort verfügbar
Jumper Wire 10x1P male to male 20cm
sofort verfügbar
Mega 2560 + Ethernet Shield w5100 mit Cable Mega 2560 + Ethernet Shield w5100 mit Cable
sofort verfügbar
2pcs 50mm Bass Multimedia Lautsprecher 5W 4ohm Audio... 2pcs 50mm Bass Multimedia Lautsprecher 5W 4ohm Audio...
sofort verfügbar
10 Stk. 6x6x6mm DIP-4 mini Drucktaster Eingabetaster AC... 10 Stk. 6x6x6mm DIP-4 mini Drucktaster Eingabetaster AC...
sofort verfügbar
Easy-to-assemble Base for Arduino Mega Uno LCD1602 Display Easy-to-assemble Base for Arduino Mega Uno LCD1602 Display
32 bestellt, am 03.07.2017 erwartet
Sensor Shield V1.1 Expansion Board für Arduino Mega Xbee... Sensor Shield V1.1 Expansion Board für Arduino Mega Xbee...
sofort verfügbar
Batteriehalter für 4 x Mignon AA mit Anschlusskabel und... Batteriehalter für 4 x Mignon AA mit Anschlusskabel und...
sofort verfügbar