DHT11 Digitaler Temperatur- und Feuchtigkeitssensor

Item number: SE08018

Category: Environmental Sensors


3,95 €

including 19% VAT.,

Available now!

Shipping time: 1 - 3 workdays



Description

Übersicht
The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity, but its smaller and less expensive.

Technical Details

  • Low cost
  • 3,3to 5,5V power and I/O
  • 2.5mA max current use during conversion (while requesting data)
  • Good for 20-95% humidity readings with 5% accuracy
  • Good for 0-50°C temperature readings ±2°C accuracy
  • No more than 1 Hz sampling rate (once every second)
  • Body size 15.5mm x 12mm x 5.5mm
  • 4 pins with 0.1" spacing

The sensor protocol and timing is similar to the DHT22 so check out the DHT22 datasheet for more information

Arduino library and example code

Detailed usage tutorial

Lieferumfang
1x DHT11digital temperature and humidity sensor



Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Question on item

Question on item