Adafruit Stereo 20W Class D Audio Amplifier - MAX9744

Artikelnummer: AF1752

Kategorie: Amplifiers/Sound


21,17 €

inkl. 19% USt.,

1 Packung auf Lager

Lieferfrist: ca. 1 - 3 Tage

Packung


Beschreibung

Overview

Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease. Since it's class D, its completely cool-running, no heat sinks are required and it's extremely efficient - up to 93% efficiency makes it great for portable or battery powered rigs.

We like the MAX9744 amplifier at the heart of this board because its very easy to use, but it also has both analog and digital volume control capability. Use a single 1KO pot (we include one) to adjust volume analog-style. Or hook it up to your favorite microcontroller and send I2C commands to set 64-steps of volume amplification.

Some great stats about the MAX9744:

  • Power from 4.5V-14V DC voltage
  • Up to 93% efficient (88-93% typical)
  • 20mA quiescent current (or put into shutdown for 1uA quiescent)
  • Up to 29.5dB max gain
  • Use DC or AC coupled line-level input, up to 3Vpp
  • Filterless Spread-Spectrum Modulation Lowers
    Radiated RF Emissions from Speaker Cables
  • 20W Stereo Output (4O, VDD = 12V, THD+N = 10%)
  • Low 0.04% THD+N
  • Integrated Click-and-Pop Suppression
  • Short-Circuit and Thermal-Overload Protection

We took this lovely chip and wrapped it up into a breakout for you, with polarity-protection, jacks and terminal blocks, i2c level shifting, and a spot to solder in a volume pot.

Each order comes with one MAX9744 breakout board with all surface-mount parts fully assembled and tested. We also include 3 x 2pin and 1 x 3pin terminal blocks, a 470uF power filter capacitor and 1KO trim pot. To use this board, a little soldering is required to attach the terminal blocks and other components, but its fairly easy and expect it should take less than 15 minutes.

Technical Details

Dimensions (without 0.1" header or terminal blocks):

  • Length: 54mm / 2.1"
  • Width: 41mm / 1.6"
  • Height: 2mm / .08"
  • Weight: 11g

Pacakge List

1x Adafruit Stereo 20W Class D Audio Amplifier - MAX9744

Dokumente

Bedienungsanleitung

Datasheet for the MAX9744

Fritzing object in Adafruit Fritzing library

EagleCAD PCB files on GitHub

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

ähnliche Produkte:
Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302
4 Packung auf Lager
Adafruit Stereo 2.1W Class D Audio Amplifier - TPA2012 Adafruit Stereo 2.1W Class D Audio Amplifier - TPA2012
1 Packung auf Lager
Adafruit Stereo 2.8W Class D Audio Amplifier - I2C... Adafruit Stereo 2.8W Class D Audio Amplifier - I2C...
1 Packung auf Lager
Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306 Adafruit Stereo 3.7W Class D Audio Amplifier - MAX98306
4 Packung auf Lager
Diese Modul passt zu folgende Produkten:
Sparkfun Audio Cable AUX Kabel 3,5mm TRRS Connectors Male...
1 Packung auf Lager
Kunden kauften dazu folgende Produkte
Jumper Wire 10x1P male to male 20cm
478 bestellt, am 19.11.2019 erwartet
DHT22 AM2302 Digital Temperatur Feuchtigkeit Sensor mit... DHT22 AM2302 Digital Temperatur Feuchtigkeit Sensor mit...
271 Packung auf Lager
Adafruit Silicon MEMS Microphone Breakout - SPW2430 Adafruit Silicon MEMS Microphone Breakout - SPW2430
17 Packung auf Lager