Adafruit PowerBoost 500 Shield - Rechargeable 5V Power Shield

Artikelnummer: AF2078

EAN: 4060137023224

Hersteller-Artikelnr.: P2078

Kategorie: Chargers


19,94 €

inkl. 19% USt.,

sofort verfügbar

Lieferzeit: 1 bis 2 Tage

Stk


Beschreibung

What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This stackable shield goes onto your Arduino and provides a slim rechargeable power pack, with a built in battery charger as well as DC/DC booster.

Compatible with Arduino Uno, Duemilanove, Mega, Leonardo and Due - basically any Arduino-pinout-shaped Arduino as only the GND and 5V pins are used. You can stack shields on top, or stack the PowerBoost on top. Plearnse note that the powerboost does not pass through the ICSP headers (the battery is in the way) so if your stacking shield uses ICSP for data transfer (like the Etheet Shield), you'll need to stack the PowerBoost above it!

The PowerBoost shield can run off of any Lithium Ion or Lithium Polymer battery (3.7/4.2V kind) but we suggest our 1200mAh capacity  or 2000mAh capacity batteries, both of which fits very nicely in the empty space of the shield. Plug in the battery and recharge it via the microUSB jack. When you're ready to go, just unplug the Arduino from USB or the wall adapter and it will automatically switch over to shield power. Use only Lipoly batteries with protection circuitry!

The onboard boost converter can provide at learnst 500mA current, and can peak at 1A. There's an onboard fuse to protect against higher current draws which could damage the boost converter or battery. The boost converter can be damaged by high current spikes and is not recommended for driving motors or robots where the stall current can cause high current spikes

The shield comes as a kit of parts, some light soldering is required to attach the stacking headers and switch! Battery is not included, but you can pick one up in the shop (again, we suggest our 1200mAh battery or 2000mAh battery, but you can use any 500mAh+ size you like) There's even an optional switch. If you choose to solder it in, it will let you tu the shield and Arduino power on/off.


 


TECHNICAL DETAILS
Dimensions: 53mm x 69mm x 2mm / 2.1" x 2.7" x 0.08"
Height w/ JST: 8mm / 0.3"
Weight: 12.5g

Lieferumfang
1x Adafruit PowerBoost 500 Shield - Rechargeable 5V Power Shield

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

Diese Modul passt zu folgende Produkten:
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1100mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1100mAh...
sofort verfügbar
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh...
sofort verfügbar
Kunden kauften dazu folgende Produkte
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh...
sofort verfügbar
Arduino Uno R3 mit Plug-and-Play 2,8 TFT LCD Touch Shield Arduino Uno R3 mit Plug-and-Play 2,8 TFT LCD Touch Shield
Lange Lieferzeit beachten!
Pololu 3-Pin Female JST PH-Style Cable (30cm) for Sharp... Pololu 3-Pin Female JST PH-Style Cable (30cm) for Sharp...
sofort verfügbar
12864 128x64 Graphic LCD Blue Display Modul 5V ST7920 12864 128x64 Graphic LCD Blue Display Modul 5V ST7920
sofort verfügbar
USB Charger EU Plug Adapter Netzteil 10,5W 2,1A standard... USB Charger EU Plug Adapter Netzteil 10,5W 2,1A standard...
sofort verfügbar
V- TEC Jumper Wires Pre-crimped Terminals 10-Piece... V- TEC Jumper Wires Pre-crimped Terminals 10-Piece...
sofort verfügbar