Adafruit PiTFT Plus 480x320 3.5" TFT Display +Touchscreen for Raspberry Pi

Artikelnummer: AF2441

Kategorie: Pi HATs & Plates


53,49 €

inkl. 19% USt.,

Lange Lieferzeit beachten!

Lieferfrist: ca. 8 - 10 Tage

Stk


Beschreibung

DESCRIPTION

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x32016-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi Zero, Pi 3, Pi 2 or Model A+ / B+ (any Pi with a 2x20 connector). Not for use with an old Pi 1 with 2x13 connector If you'd like to use a 3.5" display with the original Pi A or Pi B, check out this version

The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x13 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO.

Best of all, it comes fully assembledand ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look.

We've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!

TECHNICAL DETAILS

  • Display current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA

PACKAGE LIST

1x Adafruit PiTFT Plus 480x320 3.5" TFT+Touchscreen for Raspberry Pi


Interface: SPI
Touchscreen: resistive
Thema: Raspberry Pi
Marke: Adafruit
Auflösung: 480 x 320
Größe: 3,5 inch

Dokumente

Bedienungsanleitung

Github

Datasheet for the controller chip

Datasheet for the 'raw' 3.5" TFT display

PCB files on GitHub

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

ähnliche Produkte:
Display for Raspberry Pi

Display for Raspberry Pi


ab 19,95 € *
sofort verfügbar
Waveshare 3,5 inch Raspberry Pi Resistive Touchscreen... Waveshare 3,5 inch Raspberry Pi Resistive Touchscreen...
sofort verfügbar
Diese Modul passt zu folgende Produkten:
Raspberry Pi 2 Model B Quadcore CPU 1GB RAM kompatibel... Raspberry Pi 2 Model B Quadcore CPU 1GB RAM kompatibel...
sofort verfügbar
Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE... Raspberry Pi 3 Model B+ (plus) BCM2837B0 SoC, IoT, PoE...
sofort verfügbar
Raspberry Pi 3 Model B, 1,2 GHz 1GB RAM ARMv8 Board Raspberry Pi 3 Model B, 1,2 GHz 1GB RAM ARMv8 Board
sofort verfügbar