Adafruit NeoPixel NeoMatrix - 64 RGBW - Natural

Artikelnummer: AF2871

Kategorie: LED-Punktmatrixanzeigen


53,49 €

inkl. 19% USt.,

sofort verfügbar

Lieferfrist: ca. 1 - 2 Tage

Stk


Beschreibung

DESCRIPTION

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGBW LEDs adorn the NeoMatrix for a blast of configurable color and white. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.

This is the Natural White RGBW version. We also have this NeoMatrix in Warm White, Cool White, and good ole' RGB!

The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project!

Wiring it up is easy: there are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller. If you're using our NeoPixel Arduino library, use digital #6. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 60mA (thats up to 3.5 Amps per panel if all LEDs are on bright white!) we suggest our 5V 2A power supply. For most uses, you'll see about 1-2A of current per panel.

If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first panel's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 4 or more panels you may run low on RAM if you're using an UNO. Watch your power usage too, you may need a 5V 10A power supply for so many of these!

There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

TECHNICAL DETAILS

Details:

  • Dimensions: 71mm x 71mm x 3mm / 2.8" x 2.8" 0.1"
  • Weight: 24.21g

PACKAGE LIST

1x Adafruit NeoPixel NeoMatrix - 64 RGBW - Natural

Dokumente

Überguide

SK6812 Datasheet

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

ähnliche Produkte:
Adafruit NeoPixel NeoMatrix - 64 RGBW - Cool White Adafruit NeoPixel NeoMatrix - 64 RGBW - Cool White
sofort verfügbar
Adafruit NeoPixel NeoMatrix - 64 RGBW - Warm White Adafruit NeoPixel NeoMatrix - 64 RGBW - Warm White
sofort verfügbar
Adafruit NeoPixel Shield - 40 RGBW - Cool White Adafruit NeoPixel Shield - 40 RGBW - Cool White
sofort verfügbar
Adafruit NeoPixel Shield - 40 RGBW - Natural White Adafruit NeoPixel Shield - 40 RGBW - Natural White
sofort verfügbar
Adafruit NeoPixel Shield - 40 RGBW - Warm White Adafruit NeoPixel Shield - 40 RGBW - Warm White
sofort verfügbar
Kunden kauften dazu folgende Produkte
433Mhz RF Wireless Sender Empfänger Modul Transmitter... 433Mhz RF Wireless Sender Empfänger Modul Transmitter...
sofort verfügbar
HIMALAYA basic Nano Board ATMEGA mit mini-USB Kabe,l... HIMALAYA basic Nano Board ATMEGA mit mini-USB Kabe,l...
sofort verfügbar
Jumper Wire 10x1P female to female 20cm
sofort verfügbar
HIMALAYA basic Pro micro 5V 16MHz Arduino mini Leonardo... HIMALAYA basic Pro micro 5V 16MHz Arduino mini Leonardo...
Lange Lieferzeit beachten!
Jumper Wire 10x1P male to male 20cm
sofort verfügbar