Adafruit MPL115A2 - I2C Barometric Pressure Temperature Sensor

Artikelnummer: AF992

Kategorie: Barometric pressure


9,46 €

inkl. 19% USt.,

sofort verfügbar

Lieferfrist: ca. 1 - 3 Tage

Stk


Beschreibung

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMP085, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. However, it's great for basic barometric pressure sensing. The sensor is soldered onto a PCB with 10K pull-up resistors on the I2C pins.

This chip is good for use with power and logic voltages ranging from 2.4V to 5.5V so you can use it with your 3V or 5V microcontroller. There's a basic temperature sensor inside but there's no specifications in the datasheet so we're not sure how accurate it is.

This chip looks and sounds a whole lot like the MPL3115A2 but this is the less precise version, best for barometric sensing only

Using the sensor is easy. For example, if you're using an Arduino, simply connect the VDD pin to the 5V voltage pin, GND to ground, SCL to I2C Clock (Analog 5 on an UNO) and SDA to I2C Data (Analog 4 on an UNO). Then download our MPL115A2 Arduino library and example code for temperature, pressure and basic altitude calculation. Install the library, and load the example sketch. Immediately you'll have the temperature, pressure and altitude data printed in the serial console.

Technical Details

  • PCB weight: 0.61g
  • Vin: 2.4 to 5.5 VDC
  • Logic: 3 to 5V compliant
  • Pressure sensing range: 500-1150 hPa (up to 10Km altitude)
  • 1.5 hPa / 50 m altitude resolution
  • This board/chip uses I2C 7-bit address 0x60

MPL115A2 Datasheet

Fritzing object in Adafruit Fritzing library

EagleCAD PCB files on GitHub

Using the sensor is easy. For example, if you're using an Arduino, simply connect the VIN pin to the 5V voltage pin, GND to ground, SCL to I2C Clock (Analog 5 on an UNO) and SDA to I2C Data (Analog 4 on an UNO). Then download our MPL115A2 Arduino library and example code for temperature, pressure and basic altitude calculation. Install the library, and load the example sketch. Immediately you'll have the temperature, pressure and altitude data printed in the serial console.

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

Kunden kauften dazu folgende Produkte
DHT22 AM2302 Digital Temperatur Feuchtigkeit Sensor mit... DHT22 AM2302 Digital Temperatur Feuchtigkeit Sensor mit...
Lange Lieferzeit beachten!
Adafruit Si7021 Temperature & Humidity Sensor Breakout Board Adafruit Si7021 Temperature & Humidity Sensor Breakout Board
2 bestellt, am 24.07.2018 erwartet
AI-Thinker ESP 8266 Serial WIFI Wireless Remote Control...
sofort verfügbar
3m DS18B20 Digital Wasserdicht Temperatur Sensor Modul  LS4G 3m DS18B20 Digital Wasserdicht Temperatur Sensor Modul  LS4G
Lange Lieferzeit beachten!
NodeMcu Lua WIFI Internet Development Board based on... NodeMcu Lua WIFI Internet Development Board based on...
sofort verfügbar