Adafruit Feather 32u4 Basic Proto

Artikelnummer: AF2771

EAN: 4060137021183

HAN: 2771

Warengruppe: Komponente

Herkunftsland: US

TARIC-Code: 85423111000

Kategorie: Board


21,17 €

inkl. 19% USt.,

2 Pack auf Lager

Lieferfrist: ca. 1 - 3 Tage

Pack


Beschreibung

Details

Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right inWe have other boards in the Feather family, check'em out here!

At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. This chip is well supported in the Arduino IDE and can run just about every sensor/library out there.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Here's some handy specs!

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 4.8 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • 8 x PWM pins
  • 10 x analog inputs (one is used to measure the battery voltage)
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

The Feather 32u4 Basic Proto has some extra space left over, so we give you a tiny little prototyping area. If you just need to attach a button or sensor, you may be able to skip out on a breadboard and wire it directly on there.

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery and USB cable not included (but we do have lots of options in the shop if you'd like!)

Check out our tutorial for all sorts of details, including schematics, files, IDE instructions, and more!

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

Diese Modul passt zu folgende Produkten:
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1200mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 1200mAh...
2713 Pack auf Lager
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh...
1947 Pack auf Lager
Kunden kauften dazu folgende Produkte
LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh... LiPo Akku Lithium-Ion Polymer Batterie 3,7V 2000mAh...
1947 Pack auf Lager
Steckbrett Breadboard 400 Pins Kontakte
165 Pack auf Lager
Adafruit FeatherWing Proto - Prototyping Add-on For All... Adafruit FeatherWing Proto - Prototyping Add-on For All...
28 Pack auf Lager
Adafruit DC Motor + Stepper FeatherWing Add-on For All... Adafruit DC Motor + Stepper FeatherWing Add-on For All...
2 Pack auf Lager
Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0 Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0
3 Pack auf Lager