Adafruit DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Artikelnummer: AF2927

Kategorie: Kontroller


21,17 €

inkl. 19% USt.,

2 Packung auf Lager

Lieferfrist: ca. 1 - 3 Tage

Packung


Beschreibung

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can coect a FeatherWing on top or bottom of your Feather board and let the board take flight!

The original Adafruit Motorshield Kit is one of our most beloved kits, which is why we decided to squish it all together on a FeatherWing to make something even smaller, lighter, and more portable! Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C.

Since the FeatherWing only uses the I2C (SDA & SCL pins), it works with any and all Feathers- ATmega32u4, ATSAM M0 or ESP8266-based. You can stack it with any other FeatherWing or with itself (just make sure you have each wing with a unique I2C address) 

Motor FeatherWing Specs:

  • 4 full H-Bridges: the TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, inteal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 12-bit speed selection (so, about 0.02% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Motors automatically disabled on power-up
  • Big 3.5mm terminal block coectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to coect exteal power, for separate logic/motor supplies
  • Completely stackable design: 5 address-select jumper pads means up to 32 stackable wings: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
  • Download the easy-to-use Arduino software library, check out the examples and you're ready to go!

Comes with an assembled & tested FeatherWing, terminal blocks & plain header. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time. Feather and motors are not included but we have lots of motors in the shop. You can use any DC or stepper motors that run from 4.5-13.5VDC and draw under 1.2A per coil. You'll likely also need to provide some exteal power supply for your motors, since its not suggested you run motors from the Feather's lipoly battery.

TECHNICAL DETAILS

  • Dimensions: 50.8mm x 22.9mm x 1.6mm / 2" x 0.9" x 0.06"
  • Weight: 4.6g

Lieferumfang

1x DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

Kunden kauften dazu folgende Produkte
FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
6 Packung auf Lager
8-Channel PWM or Servo FeatherWing Add-on For All Feather... 8-Channel PWM or Servo FeatherWing Add-on For All Feather...
4 Packung auf Lager
Adafruit FeatherWing Proto - Prototyping Add-on For All... Adafruit FeatherWing Proto - Prototyping Add-on For All...
29 Packung auf Lager
Adafruit Wirless Feather HUZZAH with ESP8266 WiFi Adafruit Wirless Feather HUZZAH with ESP8266 WiFi
3 Packung auf Lager
Jumper Wire 10x1P female to male 20cm Jumper Wire 10x1P female to male 20cm
394 bestellt, am 10.12.2019 erwartet