Adafruit 7.0" 40-pin TFT Display - 800x480 with resistive Touchscreen

Artikelnummer: AF2354

Kategorie: Graphic TFT


50,37 €

inkl. 19% USt.,

momentan nicht verfügbar


Beschreibung

Description

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This version has a 4-wire resistive touchscreen attached. It's exactly the same TFT display as PID 2353 but with a resistive touch panel so it is a little more expensive.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V instead of our other small displays that can run the backlight off of 5V.

For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino & friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don't have any support or tutorials for that purpose.

Technical Details

  • Dimensions: 164mm x 100mm x 5mm / 6.5" x 3.9" 0.2"

Package List

1x Adafruit 7.0" 40-pin TFT Display - 800x480 with resistive Touchscreen

 

Auflösung: 800 x 480
Thema: Arduino
Touchscreen: resistive
Marke: Adafruit
Interface: RGB/LVDS
Größe: 7,0inch

Dokumente

Datenblatt

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

----

ähnliche Produkte:
Adafruit 4.3 40-pin TFT Display - 480x272 with resistive... Adafruit 4.3 40-pin TFT Display - 480x272 with resistive...
2 Packung auf Lager
Adafruit 5.0 40-pin TFT Display - 800x480 with resistive... Adafruit 5.0 40-pin TFT Display - 800x480 with resistive...
2 Packung auf Lager
Adafruit 7.0 40-pin TFT Display - 800x480 without... Adafruit 7.0 40-pin TFT Display - 800x480 without...
sofort verfügbar
Diese Modul passt zu folgende Produkten:
Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter
3 Packung auf Lager
Kunden kauften dazu folgende Produkte
Adafruit RA8875 Driver Board for 40-pin TFT Touch... Adafruit RA8875 Driver Board for 40-pin TFT Touch...
1 Packung auf Lager
Adafruit TFP401 HDMI DVI Decoder to 40-Pin TTL Breakout -... Adafruit TFP401 HDMI DVI Decoder to 40-Pin TTL Breakout -...
1 Packung auf Lager
Makeblock Brass Stud M4*8+6(10-Pack) Makeblock Brass Stud M4*8+6(10-Pack)
momentan nicht verfügbar