Adafruit 1.54" Tri-Color eInk / ePaper 200x200 Display with SRAM

Item number: AF4868

Category: NEU

23,95 €

including 19% VAT.,

Please note the long delivery time!

Shipping time: 15 - 16 workdays



Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display.

It has 200x200 black and red ink pixels and a white-ish background. Using our Arduino library, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But if you do the math, 200 x 200 pixels x 2 colors = 10 KBytes. Which won't fit into many microcontroller memories.

So we did you a favor and tossed a small SRAM chip on the back. This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! You can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. The library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display.

For ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM, MicroSD, and display.

We even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Everything is 3 or 5V logic safe so you can use it with any and all microcontrollers.

Comes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing into your project.


  • 1.54" eInk/ePaper display with SSD1681 driver chipset
  • Built-in microSD slot 
  • 1x16 header for easy breadboarding
  • 4 x 2.5mm mounting holes in corners
  • Screen dimensions: 37.4 x 32mm
  • Overall dimension: 43 x 43 x 4.8mm
  • Mounting holes: 1.5" x 1.4"
  • Weight (unassembled): 9g

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: