Adafruit 0.56" 4-Digit 7-Segment Display w I2C Backpack - Blue

Artikelnummer: AF881

EAN: 4060137039249

Hersteller-Artikelnr.: 881

Kategorie: LED-Segmentanzeigen


11,95 €

inkl. 19% USt.,

Lange Lieferzeit beachten!

Lieferzeit: 8 bis 9 Tage

Stk


Beschreibung

Description

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavors - a mini 8x8 and a 4-digit 0.56" 7-segment. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.

The matrices use a driver chip that does all the heavy lifting for you: They have a built in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent color (the images above are photographed at the dimmest setting to avoid overloading our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address-selection jumpers so you can connect up to four mini 8x8's or eight 7-segments (or a combination, such as four mini 8x8's and four 7-segments, etc) on a single I2C bus.

The product kit comes with:

  • A fully tested and assembled LED backpack
  • Ultra-bright 4-digit 0.56" tall blue seven-segment display
  • 4-pin header

A bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes.

Technical Details

This board/chip uses I2C 7-bit address between 0x70-0x77, selectable with jumpers

  • Backpack Dimensions: 27mm x 50mm x 4mm / 1.1" x 2" x 0.16"
  • Backpack Weight: 5.3g
  • 7-Segment Display Dimensions: 19mm x 50mm x 14mm / 0.75" x 2" x 0.56"
  • 7-Segment Display Weight: 8.4g

Datasheets, schematic, EagleCAD PCB files, and Fritzing available in the product tutorial

Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Frage zum Produkt

Kontaktdaten
Frage zum Produkt
max. 500 Zeichen

Kunden kauften dazu folgende Produkte
5V/220V 8 Channel Optocouplers Relay for Arduino... 5V/220V 8 Channel Optocouplers Relay for Arduino...
sofort verfügbar
DIY Prototyping Expansion Board for Raspberry Pi DIY Prototyping Expansion Board for Raspberry Pi
sofort verfügbar
NEU! LCD Display for Arduino and Raspberry Pi 2004 I2C... NEU! LCD Display for Arduino and Raspberry Pi 2004 I2C...
Lange Lieferzeit beachten!
Pololu Toggle Switch: 3-Pin, SPDT, 5A Pololu Toggle Switch: 3-Pin, SPDT, 5A
sofort verfügbar
Adafruit 1.2 4-Digit 7-Segment Display w I2C Backpack - Red Adafruit 1.2 4-Digit 7-Segment Display w I2C Backpack - Red
sofort verfügbar
Adafruit Tactile Switch Buttons (12mm square, 6mm tall) x...
Lange Lieferzeit beachten!