Pololu 5V, 600mA Step-Down Voltage Regulator D36V6F5 Spannungsregler

Pololu 5V, 600mA Step-Down Voltage Regulator D36V6F5 Spannungsregler

8,95 € (Net 7,52 € )

In stock

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3792
GTIN: 4060137051487
Category: Step-Down
Manufacturers: Pololu
MPN: 3792
Storage Tiers: Maintain

Overview

The D36V6x family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large.

Features

Input voltage: 5.2 V to 50 V (minimum input subject to dropout voltage considerations; see the dropout voltage section for details)
Output voltage: 5 V with 4% accuracy
Maximum output current: 600 mA (see the maximum continuous output current graph below)
Fixed 2.1 MHz switching frequency
High-voltage enable input can put the board into a low-power state where it draws less than 2 µA (typical)
Low quiescent current: < 0.1 mA (see the quiescent current graph below)
Over-current and short-circuit protection, over-temperature shutoff
Small size: 0.5? × 0.4? × 0.1? (13 mm × 10 mm × 3 mm)
Weight: 0.5 g

Dimensions

Size: 0.4? × 0.5? × 0.1?¹
Weight: 0.5 g¹

General specifications

Minimum operating voltage: 5.2 V²
Maximum operating voltage: 50 V
Maximum output current: 600 mA
Output voltage: 5 V
Reverse voltage protection?: N
Maximum quiescent current: 0.1 mA³
Output type: fixed 5V

Identifying markings

PCB dev codes: reg04b
Other PCB markings: 0J7034

Notes:

1. Without included optional headers.
2. Subject to dropout voltage considerations.
3. While enabled with no load. Can be reduced to under 2 µA using the enable pin.

Storage Tiers:	Maintain
Output Voltage:	5V
Output Current max.:	600mA
Operating Voltage max.:	50V
Operating Voltage min.:	5.2V
Regulator-Function:	Step-Down
Quiescent Current max.:	0.1mA
Output-Type:	fixed
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	1,10 × 1,30 × 0,30 cm