Pololu 5V Step-Up Step-Down Spannungsregler S7V7F5

Pololu 5V Step-Up Step-Down Spannungsregler S7V7F5

8,95 € (Net 7,52 € )

Top

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

SKU: PO2119
GTIN: 4060137015243
Category: Step-Up/Step-Down
Manufacturers: Pololu
MPN: 2119
Storage Tiers: Maintain

The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 5 V output with a typical efficiency of over 90%.

This flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above 5 V and drops below as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered. For instance, a 4-cell battery holder, which might have a 6 V output with fresh alkalines but a 4.8 V nominal voltage with NiMH cells and a 4.0 V output with partially discharged cells, can now be used for a 5 V circuit. In another typical scenario, a disposable 9V battery powering a 5 V circuit can be discharged to under 3 V instead of cutting out at 6 V, as with typical linear or step-down regulators.

In typical applications, this regulator can deliver about 1 A continuous when the input voltage is higher than 5 V (stepping down) and 500 mA continuous when the input is lower than 5 V (stepping up); please see the graphs at the bottom of this page for a more detailed characterization. The regulator has short-circuit protection, and thermal shutdown prevents damage from overheating; the board does not have reverse-voltage protection.

For an adjustable-output version of this regulator, consider our step-up/step-down voltage regulator S7V8A.

Features:

input voltage: 2.7 V to 11.8 V
fixed 5V output with +5/-2% accuracy
typical continuous output current: 1 A when stepping down; 500 mA when stepping up (Actual continuous output current depends on input voltage. See Typical Efficiency and Output Current section below for details.)
power-saving feature maintains high efficiency at low currents (quiescent current is less than 0.1 mA)
integrated over-temperature and short-circuit protection
small size: 0.35" × 0.475" × 0.1" (9 × 12 × 3 mm)

Dimensions(Without included optional headers.):

Size: 0.35" × 0.475" × 0.1"
Weight: 0.4 g

Specifications:

Minimum operating voltage: 2.7 V
Maximum operating voltage: 11.8 V
Maximum output current: 1 A. When stepping down; approximately 500 mA when stepping up (depends on input voltage).
Output voltage: 5 V
Reverse voltage protection?: N
Maximum quiescent current: 0.1 mA. With no load. Actual quiescent current depends on input voltage.

Storage Tiers:	Maintain
Output Voltage:	5V
Output Current max.:	1000mA
Operating Voltage max.:	11.8V
Operating Voltage min.:	2.7V
Regulator-Function:	Step Down/Step Up
Quiescent Current max.:	0.1mA
Output-Type:	fixed
Shipping weight:	0,01 kg
Item weight:	0,00 kg
Dimensions ( Length × Width × Height ):	0,90 × 1,30 × 0,30 cm