Pololu HP 12V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox)

Pololu HP 12V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox)

37,95 € (Net 31,89 € )

In stock

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO4840
GTIN: 4060137101861
Category: I-Form
Manufacturers: Pololu
MPN: 4840
Storage Tiers: Maintain

This is the motor and encoder portion of our high-power (HP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.

Key specifications:

voltage: 12 V
no-load performance: 10000 RPM, 300 mA
stall extrapolation: 0.4 kg?cm (5.5 oz?in), 5.0 A

Dimensions

Size: 25D x 46L mm (Length does not include the motor shaft. )
Weight: 60 g

General specifications

Gear ratio: 1:1 (This motor does not have a gearbox.)
No-load speed @ 12V: 10000 rpm (Typical; ±20%)
No-load current @ 12V: 0.30 A (Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.)
Stall current @ 12V: 5.0 A
Stall torque @ 12V: 0.4 kg·cm (Stalling is likely to damage the motor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.)
Max output power @ 12V: 10 W
No-load speed @ 6V: 5000 rpm
Stall current @ 6V: 2.5 A
Stall torque @ 6V: 0.2 kg·cm(This motor will run at 6 V but is intended for operation at 12 V.)
Motor type: 12V, 5.0A stall (HP 12V)
Lead length: 8 in (May vary by a few inches.)
Encoders?: Y

Storage Tiers:	Maintain
Dimension (mm):	25D
Max Power (W):	10
Form/Type:	High-Power (HP)
Encoder:	With
Stall Current (A):	5
Stall Torque (kg-cm):	0.4
Rated Voltage (V):	12
Gear Ratio:	1:1 (no gearbox)
Shaft:	Single
No-Load Speed (RPM):	10000
No-Load Current (A):	0.3
Shipping weight:	0,08 kg
Item weight:	0,07 kg
Dimensions ( Length × Width × Height ):	4,60 × 2,50 × 2,50 cm