Pololu 9.7:1 Metal Gearmotor 25Dx48L mm HP 12V brushed DC motor

Pololu 9.7:1 Metal Gearmotor 25Dx48L mm HP 12V brushed DC motor

Extended services for motors:
Customized solutions
Alternative solutions
Bulk purchase request

41,95 € (Net 35,25 € )

In stock

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3202
GTIN: 4060137102141
Category: I-Form
Manufacturers: Pololu
MPN: 3202
Storage Tiers: Maintain

This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder.

Exact gear ratio: 22×22×24 / 12×10×10 = 9.68:1

Key specifications

voltage: 12 V
no-load performance: 1000 RPM, 250 mA
stall extrapolation: 3.9 kg?cm (54 oz?in), 5.0 A

Dimensions

Size:25D x 48L mm(Length measurement is from gearbox face plate to back of motor (it does not include the output shaft or motor terminals).)
Weight:82g
Shaft diameter:4 mm(D shaft)

General specifications

Gear ratio: 9.68:1
No-load speed @ 12V: 1000 rpm(Typical; ±20%)
No-load current @ 12V: 0.25 A(Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.)
Stall current @ 12V: 5.0 A
Stall torque @ 12V: 3.9 kg·cm(Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.)
Max output power @ 12V: 10 W
No-load speed @ 6V: 500 rpm
Stall current @ 6V: 2.5 A
Stall torque @ 6V: 2.0 kg·cm(This motor will run at 6 V but is intended for operation at 12 V.)
Motor type: 12V, 5.0A stall (HP 12V)

Performance at maximum efficiency

Max efficiency @ 12V: 52 %
Speed at max efficiency: 890 rpm
Torque at max efficiency: 0.58 kg·cm
Current at max efficiency: 0.84 A
Output power at max efficiency: 5.3 W

General specifications

Encoders?: N

Storage Tiers:	Maintain
Dimension (mm):	25D
Max Power (W):	10
Form/Type:	High-Power (HP)
Encoder:	Without
Stall Current (A):	5
Stall Torque (kg-cm):	3.9
Rated Voltage (V):	12
Gear Ratio:	9.7:1
Shaft:	Single
No-Load Speed (RPM):	1000
No-Load Current (A):	0.25
Shipping weight:	0,10 kg
Item weight:	0,08 kg
Dimensions ( Length × Width × Height ):	4,80 × 2,50 × 2,50 cm